Newest - Mc Daid Agri Spares

COUPLING No.19 ITALIAN MALE 6"

CODE: 8996

Italian coupling with hose tail and ball end Finish: galvanised

€23.58 (€29.00 inc tax)

In stock

+ −

COUPLING ITALIAN Q/ATTACH FEMALE 6in HOSE

CODE: 8835

Italian type coupling with quick attach Supplied with handle Finish: galvanised Hose Side Suitable for Major, Conor and N.C. tankers

€40.65 (€50.00 inc tax)

In stock

+ −

Joiner Hose - 6"

CODE: 8843

Straight hose joiner for assembling two hoses together using suitable bolt type hose clips Finish: galvanised 6"

€16.26 (€20.00 inc tax)

Out of stock

6" GATE VALVE

CODE: G8870

Standard stem gate valve Four bolt flange plate x four bolt flange plate 6"

€113.82 (€140.00 inc tax)

In stock

+ −

Pinion and pinion gear - AP73, AP83, AP630, AP730, AP830

CODE: 0707160000

Pinion and pinion gear - Welger FITS - AP73, AP83, AP630, AP730, AP830 Linked parts: 0707.16.00.00, 0717160000

€600.00 (€738.00 inc tax)

In stock

+ −

Drive Chain Idler Bearing

CODE: 1638422M1

Rubber Handle

€25.00 (€30.75 inc tax)

In stock

+ −

Plunger Bush - Fits - 120, 124, 128, 220, 224, 228

CODE: 831103M1

Plunger Bush 831103M1 Massey Ferguson A bush used in the plunger in the Massey Ferguson 120, 124, 128, 220, 224 and 228 series square balers. Height - 52mm Outer Ø - 37mm Inner Ø - 32mm Linked parts: 831103m, 831103m1

€31.50 (€38.75 inc tax)

In stock

+ −

Gear - Fits - 120, 124, 128, 220, 224, 228

CODE: 918012M91

Gear 918012M1 Massey Ferguson A gear used in the knotter area of the Massey Ferguson 120, 124, 128, 220, 224 and 228 series square balers. Notes Number of teeth - 9 Height - 7mm Inner Diameter - 4.5mm Linked parts: 918012M91, 918012M1, 918012M

€22.50 (€27.68 inc tax)

In stock

+ −

Knotter Gear - Fits - 120, 124, 128, 220, 224, 228

CODE: 918027m91

Knotter Gear 918027M2 Massey Ferguson A gear used in the knotter area of the Massey Ferguson 120, 124, 128, 220, 224 and 228 series square balers. Notes Number of teeth - 18 Inner Diameter - 15mm Linked parts: 150927M6

€29.50 (€36.29 inc tax)

In stock

+ −

Knife Bolt - M12 x 30mm

CODE: 0902606300/30

Welger Knife Bolt 0902606300/30 12 x 30mm Linked parts: 0902606300, 0902.60.63.00

€2.20 (€2.71 inc tax)

In stock

+ −

Pick Up Belt – Fits – 900 series

CODE: 450552

Pick Up Belt 450552 New Holland A pick up belt in the 900 series square baler. Linked parts: 450552

€28.50 (€35.06 inc tax)

In stock

+ −

Plunger Knife - AP12, AP50, AP51

CODE: 0982.25.01.00

PLUNGER KNIFE 0982.25.01.00 Welger A steel knife used in the plunger area of the square baler. This is the moving knife. Used in the AP12, AP50 and AP51 series baler. Length - 300mm Width - 73mm 3 mounting holes Linked parts: 0982.25.01.00, 0982250100,...

€135.00 (€166.05 inc tax)

In stock

+ −

Chamber Knife - AP38, 42, 400, 430

CODE: 0982.20.07.00

Chamber Knife 0982.20.07.00 Welger The fixed / stationary chamber knife used in the Welger AP38, 42, 400, 430 series square balers. Length - 265mm Width - 70mm Distance between mounting holes - 105mm Mounting holes Ø - 30 x 10 Linked parts:...

€85.50 (€105.17 inc tax)

In stock

+ −

Chamber Knife - Fits - AP630

CODE: 0982251300

Chamber Knife 0982251300 Welger A stationary / fixed chamberr knife used in the Welger AP630 square balers. Length - 325mm Width at widest part - 108mm Width at narrowest part - 87mm Distance between Holes - 115mm Linked parts: 0982251300, 0982.25.13.00

€80.00 (€98.40 inc tax)

In stock

+ −

Needle Carrier - Markant 55, 65

CODE: 812641

€310.00 (€381.30 inc tax)

In stock

+ −

Chamber Wedge - Markant

CODE: 810860

Chamber Wedge 810860 Claas A chamber wedge used in Claas Markant series square balers. Linked parts: 810860.0, 810860, cl810860

€24.50 (€30.14 inc tax)

In stock

+ −

Stationary / Fixed Chamber Knife - Markant 52, 55, 60, 65

CODE: 812496

Stationary / Fixed Chamber Knife 812496 Claas A chamber knife used in Claas Markant 52, 55, 60, 65 series square balers. Linked parts: 812469

€94.50 (€116.24 inc tax)

In stock

+ −

Plunger Knife - Markant 52, 55, 60, 65

CODE: 812553

Plunger Knife 812553 Claas A plunger knife used in Claas Markant 52, 55, 60, 65 series square balers. Linked parts: 812553

€94.50 (€116.24 inc tax)

In stock

+ −

Knife Bolt - M12 x 35mm

CODE: 0902606300

Welger Knife Bolt 0902606300 12 x 35mm Linked parts: 0902606300, 0902.60.63.00

€2.50 (€3.08 inc tax)

In stock

+ −

Plunger Knife - AP53, 500, 530

CODE: 0982.25.09.00

Plunger Knife 0982.25.09.00 Welger The moving plunger knife used in the Welger AP53, 500 and 530 series square balers. Notes Length - 320mm Width at widest part - 70mm Width at narrowest part - 35mm Distance between mounting holes - 95mm Height -...

€115.00 (€141.45 inc tax)

In stock

+ −

Adjustable Plunger Stud - Fits 200, 300 and 900 series

CODE: 133816

Adjustable Plunger Stud 133816 New Holland For use An adjustable stud used in the plunger area of the 200, 300 and 900 series New Holland square balers. Linked parts: 133816

€48.50 (€59.66 inc tax)

In stock

+ −

Plunger Knife - AP41

CODE: 0982.25.02.00

Plunger Knife 0982.25.02.00 Welger The moving plunger knife used in the Welger AP41 square baler. Length - 270mm Width - 52mm Distance between mounting holes - 110mm Mounting holes Ø - 25 x 12 Height - 27mm Linked parts: 0982.25.02.00, 0982250200,...

€100.00 (€123.00 inc tax)

In stock

+ −

Plunger Knife - AP42, 400, 430

CODE: 0982.25.11.00

Plunger Knife 0982.25.11.00 Welger The moving plunger knife used in the Welger AP42, 400, 430 series square balers. Notes Length - 273mm Width - 60mm Distance between mounting holes - 118mm Height - 58mm Mounting holes Ø - 25 x 12 Linked...

€85.50 (€105.17 inc tax)

In stock

+ −

Plunger Knife - AP71

CODE: 0982250300

Plunger Knife 0982.25.03.00 Welger The moving plunger knife used in the Welger AP71 square baler. Length - 345mm Width - 60mm Distance between mounting holes - 96mm Height - 45mm Linked parts: 0982250300, 0982.25.03.00, 1109160211, 1109.16.02.11

€110.00 (€135.30 inc tax)

In stock

+ −

Knotter Spring - 430, 435, 440, 445

CODE: 201637C1

Knotter Spring Overall Length - 185mm Width at widest part - 25mm Fits - 430, 435, 440, 445 series balers Linked parts: 201637c1, 201642c1

€24.50 (€30.14 inc tax)

In stock

+ −

Twine Guide Mounting Plate

CODE: 352133R1

Twine Guide Mounting Plate Fits - 430, 435, 440, 445 series balers Linked parts: 352133, 352133r1

€6.50 (€8.00 inc tax)

In stock

+ −

Elbow and Spring Retainer

CODE: 201644C1

International Elbow and Spring Retainer Fits - 430, 440 series balers Linked parts: 201644, 201644C1

€6.50 (€8.00 inc tax)

In stock

+ −

Knurl

CODE: 3100851

Knurl Fits - B47, 430, 440 Linked parts: 3100851, 3100851R1

€18.50 (€22.76 inc tax)

In stock

+ −

Bolt - SET OF 2

CODE: 220125

Bolt - SOLD AS 2 PIECES Length - 14mm External Ø - 4mm Linked parts: 220125

€2.00 (€2.46 inc tax)

In stock

+ −

Retainer Bilhook Cam Spring

CODE: 131DA

International Retainer Bilhook Cam Spring Length - 39mm External Ø - 12mm Fits - 430, 440 series balers Linked parts: U13033, 13033

€8.50 (€10.46 inc tax)

In stock

+ −

Pick Up Band - Fits - 420, 422, 430, 435, 440 series balers

CODE: 754953R1

Pick Up Band 754953R1 International A pick up band used in the International 420, 422, 430, 435, 440 series square balers. Linked parts: 754953, 754953R1, 754953 R1

€28.50 (€35.06 inc tax)

In stock

+ −

Pick Up Band - Fits - AP12 series baler

CODE: 2101.42.14.01

Pick Up Band 2101.42.14.01 Welger A pick up band used in the Welger AP12 series baler Linked parts: 2101.42.14.01, 210142140101

€32.00 (€39.36 inc tax)

In stock

+ −

Pick Up Band - Fits - AP42, AP52 series balers

CODE: 1121.42.04.16

Pick Up Band 1121.42.04.16 Welger A pick up band used in the Welger AP42 and AP52 series balers Linked parts: 1125420501, 1125.42.05.01, 1121.42.04.16, 1121420416

€32.00 (€39.36 inc tax)

In stock

+ −

Pick Up Band - Fits - AP48, 53, 73, 400, 500, 530, 630, 730 series balers

CODE: 1125.42.05.01

Pick Up Band 1125.42.05.04 Welger A pick up band used in the Welger APAP48, 53, 73, 400, 500, 530, 630, 730 series balers Linked parts: 1125420501, 1125.42.05.01, 1121.42.05.05, 1121420505, 1121.42.04.16, 1121420416, B127055

€32.00 (€39.36 inc tax)

In stock

+ −

Pick Up Band - Fits - 370, 900, 920, 925, 930, 935 series balers

CODE: 211567

PICK UP BAND 211567 NEW HOLLAND A pick up band used in the New Holland 370, 900, 920, 925, 930, 935 series balers. Linked parts: 211567, 80211567

€25.50 (€31.37 inc tax)

In stock

+ −

Twine Retainer - Fits 120, 124, 128, 220, 224, 228

CODE: 918014M91

TWINE RETAINER Fits - 120, 124, 128, 220, 224, 228 Linked parts: 918014M91, 918014M92

€105.00 (€129.15 inc tax)

In stock

+ −

Plunger Rail - 954mm

CODE: E44835

PLUNGER RAIL Length - 954mm Height - 53mm Distance between Mounting Holes - 190mm Width - 80mm Thickness - 8mm Fits - 327, 330, 332, 336, 337, 339, 342, 346, 347, 349, 359, 456, 459, 466, 467 series balers Linked parts: E44835, 44835

€100.00 (€123.00 inc tax)

In stock

+ −

Plunger Block

CODE: E39092

PLUNGER BLOCK Height - 30mm Mounting Holes Ø - 11 x 11mm Number of Mounting Holes - 2 Fits - 330, 332, 336, 339, 342, 346, 349, 359, 456, 459, 466 Linked parts: E39092, 39092, FH311771, B127533, 647FH311771F

€35.00 (€43.05 inc tax)

In stock

+ −

Gearbox Input Shaft

CODE: E38908

GEARBOX INPUT SHAFT NUMBER 7 ON DIAGRAM Length - 545mm Number of Splines - 21 Number of Mounting Holes - 1 Mounting Hole Diameter - 9mm Fits - 330, 332, 332T, 336, 336T, 342, 342T, 346, 346T series balers Linked parts: E38908, DC23788,...

€185.00 (€227.55 inc tax)

In stock

+ −

Chain Sprocket

CODE: E19123

CHAIN SPROCKET NUMBER 3 ON DIAGRAM Fits - 224T, 327, 328, 330, 332, 332AT, 336, 338, 339, 342, 346, 349T series baler Linked parts: E19123, 19123

€75.50 (€92.87 inc tax)

In stock

+ −

Feeder Crank Arm - Fits 342, 346, 347, 349, 359, 456, 459

CODE: DC16751

Feeder Crank Arm NUMBER 16 ON DIAGRAM Fits 342, 346, 347, 349, 359, 456, 459 Linked parts: AE26327, DC16751, DC16751.01

€195.50 (€240.47 inc tax)

In stock

+ −

Bearing Housing

CODE: AE25389

BEARING HOUSING NUMBER 7 ON DIAGRAM Fits - 342, 346, 347, 349, 456, 459, 466, 467, 468 series balers Linked parts: ae25389, 25389

€62.50 (€76.88 inc tax)

In stock

+ −

Knotter Drive Gear

CODE: AE12933

JOHN DEERE KNOTTER DRIVE GEAR Inner Diameter - 28mm Number of Teeth - 29 Height - 81mm Mounting Holes Ø - 12mm Number of Mounting Holes - 2 Fits - 224, 332, 336, 342, 349, 359, 456, 466 series balers Linked parts: AE12933, 12933, E14922, E20413

€98.50 (€121.16 inc tax)

In stock

+ −

Plunger Guide / Rail - Fits - 327, 328, 330, 332, 336, 338, 339, 342, 346, 348, 349, 359, 427, 456, 459, 466

CODE: E46044

PLUNGER RAIL / GUIDE Length - 850mm Height - 26mm Width - 28mm Fits - 327, 328, 330, 332, 336, 338, 339, 342, 346, 348, 349, 359, 427, 456, 459, 466 Linked parts: E46044, 46044

€49.50

In stock

+ −

Crownwheel Shaft / Pinion - Fits - 330, 332, 336, 339, 342, 346, 349, 359, 456, 466, 459

CODE: AE31201

Crownwheel Shaft / Pinion Fits - 330, 332, 336, 339, 342, 346, 349, 359, 456, 466, 459 Linked parts: AE31201, 31201, AE37809, AE29368, DC16858

€350.00 (€430.50 inc tax)

In stock

+ −

Clutch Disc - Fits - 332, 336, 342, 346

CODE: AE23860

CLUTCH DISC Inner Ø - 31mm Outer Ø - 200 Number of Splines - 21 Thickness - 6mm Height - 34mm Fits - 332, 336, 342, 346, John Deere Mower - 1320, 1326, 1327 Linked parts: AE23860, DC17783

€42.50 (€52.28 inc tax)

In stock

+ −

Knotter - Fits 339, 349T, 349WS, 359T, 359WS, 459T, 459WS

CODE: DC35574

JOHN DEERE KNOTTER Fits - 339, 349T, 349WS, 359T, 359WS, 459T, 459WS Linked parts: AE48451, AE58928, AE48472, AE37920, DC35574, 640AE48451, DC35574.Z001P, 700-DC35574

€620.00 (€762.60 inc tax)

In stock

+ −

Knotter Gear - 120, 124, 128, 220, 224, 228

CODE: 918020M1

KNOTTER GEAR Inner Ø - 14.5mm Outer Ø - 60mm Number of Teeth - 10 Height - 25mm Fits - 120 , 124, 128, 220, 224, 228 series balers Linked parts: 918020M1, 918020

€45.50 (€55.97 inc tax)

In stock

+ −

Tine Holder - AP12, AP41, RP235, RP245

CODE: 03383000

TINE HOLDER Fits - AP and RP models Linked parts: 0338.30.00.00.01, 033830000001, 0338300001, 0338.30.00.01

€5.50 (€6.77 inc tax)

In stock

+ −

Knotter Cam Wheel

CODE: 3100001R1

KNOTTER CAM WHEEL Fits - 422, 428, 430, 435, 440, 445 series baler Linked parts: 3100001R1, 667819R1, 668791R2

€89.50

In stock

+ −

Bilhook Cam Spring

CODE: U13033

INTERNATIONAL BILHOOK CAM SPRING Length - 37mm Outer Ø - 17mm Fits - 430, 435, 440, 445 Linked parts: U13033, 13033

€8.50 (€10.46 inc tax)

In stock

+ −

Plunger Bearing

CODE: 310081R91

PLUNGER BEARING Width - 21mm Outer Ø - 57mm Inner Ø - 16mm Linked parts: 310081R91, 310081, 58125

€72.50 (€89.18 inc tax)

In stock

+ −

Knotter Crown Wheel - 440 series

CODE: 662037R1

KNOTTER CROWN WHEEL Number of Mounting Holes - 3 Fits - 440 series Baler Linked parts: 662037R1, 662037

€110.50 (€135.92 inc tax)

In stock

+ −

RASSPE Billhook - 118mm

CODE: RS3765K

RASSPE Bilhook A bilhook used in the knotter section of the International square balers. Length - 118mm GENUINE RASSPE PART Linked parts: RS3765, RS3765K

€125.50 (€154.37 inc tax)

Out of stock

Pick Up / Cam Follower Arm

CODE: DC18667

PICK UP / CAM FOLLOWER ARM Fits - 219, 221, 332, 339, 342, 346, 349, 359, 459, 456, 466, 224, 336, 327, 328, 337, 338, 347, 467, 468 series balers Linked parts: DC18667, 18667

€42.50 (€52.28 inc tax)

In stock

+ −

Bearing Housing

CODE: AE33160

BEARING HOUSING NUMBER 1 ON DIAGRAM Mounting Holes Ø - 8mm Inner Ø - 97mm Linked parts: AE33160, AE32081, AE325106, AE32259, AE33036, E54221

€62.50 (€76.88 inc tax)

In stock

+ −

Bush

CODE: E45511

BUSH NUMBER 10 ON DIAGRAM FITS - 332, 336, 342, 346, 359, 459 series balers Linked parts: E45511, 45511

€25.50 (€31.37 inc tax)

In stock

+ −

Knotter Pawl / Dog

CODE: E39058

KNOTTER DOG / PAWL NUMBER 9 ON DIAGRAM Fits - 327, 328, 332, 337, 338, 339, 342, 346, 347, 349, 359, 459, 466, 467, 468, 224, Linked parts: E39058, 39058

€59.50 (€73.19 inc tax)

In stock

+ −

Spring

CODE: E2666H

BALER SPRING Length - 79mm Outer Ø - 22mm FITS - 224T, 224WS series balers Linked parts: E2666H, 2666H

€10.50 (€12.92 inc tax)

In stock

+ −

Wear Plate

CODE: E16071

WEAR PLATE NUMBER 10 ON DIAGRAM Length - 128mm Thickness - 10mm Width - 46mm Distance Between Holes - 87mm Fits - 327, 332, 336, 337, 339, 342, 346, 347, 349, 359, 456, 459, 466 series baler Linked parts: E16071, 16071

€22.50 (€27.68 inc tax)

In stock

+ −

Guide

CODE: E11354

GUIDE Number of Mounting Holes - 2 Mounting Holes Size - 10mm Fits - 332, 336, 339, 342, 346, 349, 359, 456, 459, 466, Linked parts: E11354, 640E11354, 11354

€32.50 (€39.98 inc tax)

In stock

+ −

Feeder Drive Gear

CODE: AE26326

FEEDER DRIVE GEAR NUMBER 1 ON DIAGRAM Hexagonal Shaft Ø33 Linked parts: ae26326, dc203543, cc113265

€165.00 (€202.95 inc tax)

In stock

+ −

Knotter Brake Disc

CODE: AE23994

KNOTTER BRAKE DISC Number 15 on diagram Fits - 327, 332, 336, 337, 339, 342, 346, 349, 359, 459, Linked parts: AE23994, 23994

€48.50 (€59.66 inc tax)

In stock

+ −

Feeder Drive Tension Sprocket

CODE: AE13630

Sprocket Used for chain tension in John Deere square balers Inner Ø - 35mm Number of Teeth - 11 Fits - 224, 327, 328, 332, 336, 337, 338, 339, 342, 346, 347, 349, 359, 456, 459, 466, 457 Also Fits - 330 series John Deere Combine Harvester Linked parts: AE13630,...

€24.50 (€30.14 inc tax)

In stock

+ −

Knotter Gear - Fits - 422, 428, 430, 435, 440, B46, B47

CODE: 495192R1

Knotter Gear 495192R1 International For use A gear used in the knotter area of the International square balers. Number of Teeth - 6 Number of Mounting Holes - 1 Linked parts: 495192R1, 495192R

€36.50 (€44.90 inc tax)

In stock

+ −

Pin - 160mm x Ø42mm

CODE: E39069

Plunger Pin Length - 160mm Ø - 42mm Linked parts: E39069

€33.50 (€41.21 inc tax)

In stock

+ −

Plunger Rail - 585mm x 50mm

CODE: E50148

PLUNGER RAIL Length - 585mm Thickness - 5mm Width - 50mm Distance between Mounting Holes - 89mm FITS - 327, 330, 332, 336, 337, 339, 342, 346, 347, 456, 466, 467 series models Linked parts: E50148

€35.50 (€43.67 inc tax)

In stock

+ −

Feeder Guide

CODE: E44725

FEEDER GUIDE NUMBER 2 ON DIAGRAM Linked parts: e44725

€19.80 (€24.35 inc tax)

In stock

+ −

Pick Up Tine Holder - 100 x Ø28 (SET OF 2)

CODE: 0505014

PICK UP TINE HOLDER - SET OF 2 Length - 100mm Ø28mm Linked parts: 59502, 59.502, 0505014, 05.05.014

€8.50 (€10.46 inc tax)

In stock

+ −

FLYWHEEL BUSH

CODE: BP14006

JOHN DEERE FLYWHEEL BUSH Height - 49mm Outer Diameter - 70mm Linked parts: BP14006

€19.50 (€23.99 inc tax)

In stock

+ −

Shearbolt Bush

CODE: BP14124

SHEARBOLT BUSH Length - 32mm Outer Diameter - 25mm Linked parts: BP14124

€10.50 (€12.92 inc tax)

In stock

+ −

Plunger Rail - 293 x 45 x 6mm

CODE: E42312

PLUNGER RAIL - 295mm x 45mm x 6mm FITS - 342, 346, 347, 348, 359, 456, 466, 467, 468 series models Linked parts: E42312

€14.50 (€17.84 inc tax)

In stock

+ −

Haydog Spring

CODE: E50098

HAYDOG SPRING Length - 75mm Outer Diameter - 27mm Inner Diameter - 20mm Linked parts: E50098

€10.00 (€12.30 inc tax)

In stock

+ −

Haydog Spring

CODE: E50091

JOHN DEERE HAYDOG SPRING Linked parts: E50091

€3.50 (€4.31 inc tax)

In stock

+ −

Flange and Bearing - 30mm Diameter

CODE: 610449

FLANGE AND BEARING - 30MM DIAMETER Inner Diameter - 30mm Outer Diameter - 113mm Number of Mounting Holes - 3 FITS - 330, 332, 332A, 336, 336A, 339, 342, 342AT, 342AWS, 346, 349T, 349WS Linked parts: 610449, c11452, ae28843

€55.50 (€68.27 inc tax)

In stock

+ −

Knotter Drive Bush

CODE: 843106m1

KNOTTER DRIVE BUSHING - MASSEY FERGUSON Height - 39mm Outer Diameter -38mm Linked parts: 843106m1, 833802m1

€40.50 (€49.82 inc tax)

In stock

+ −

Topper Bush - Ø32 x Ø16.5mm

CODE: 124G

TOPPER BUSHING Outer Ø - 32mm Inner Ø - 16.5mm Height - 16.5mm

€4.00 (€4.92 inc tax)

In stock

+ −

Topper Bush - Ø29 x Ø20.05mm

CODE: 2030G

TOPPER BUSHING Outer Ø - 29mm Inner Ø - 20.05mm Height - 14mm

€5.00 (€6.15 inc tax)

In stock

+ −

Topper Bush - Ø25 x Ø20mm

CODE: 2029G

TOPPER BUSHING Outer Ø - 25mm Inner Ø - 20mm Height - 14mm

€5.00 (€6.15 inc tax)

In stock

+ −

Topper Bush - Ø30 x Ø20mm

CODE: 208G

TOPPER BUSHING Outer Ø - 30mm Inner Ø - 20mm Height - 25mm Linked parts: topper, major, bush

€4.50 (€5.54 inc tax)

In stock

+ −