Newest - Mc Daid Agri Spares

Knotter Gear – fits various models

CODE: E44026

Knotter Gear E44026 John Deere For use A knotter gear used in the knotter area of the John Deere square balers. Notes Height - 30mm Inner Diameter - 15mm Number of Teeth - 7 Linked parts: JD44026, E44026

€19.80 (€24.35 inc tax)

In stock

+ −

6 Hole Pick up Spacer Plate

CODE: E41812

6 Hole Pick Up Spacer Plate E41812 John Deere For use A 6 spoke pick up spacer plate used in the John Deere 342, 346, 349, 359, 456, 459 and 466 square balers. OEM - E41812 Notes Colour may vary Linked parts: JD41812, E41812

€130.00 (€159.90 inc tax)

In stock

+ −

Clutch Plate - 140 x 204 x 4.3mm

CODE: E39037

Clutch Plate E39037 John Deere For use A clutch plate used in various John Deere square balers. Notes Inner Diameter: 140mm Outer Daimeter - 204mm Thickness - 4.3mm Linked parts: E39037, E82557

€16.50 (€20.30 inc tax)

In stock

+ −

Stationary Chamber Knife – 340mm long

CODE: E17777

Stationary / Fixed Chamber Knife JD1777 John Deere For use A steel knife used in the chamber area of the square baler. This is the fixed / stationary knife. Used in the 200, 300 and 400 series balers. Notes 340mm long 90mm at widest part 130mm from hole to...

€65.50 (€80.57 inc tax)

In stock

+ −

Stationary Chamber Knife – 320mm long

CODE: E17777

Stationary / Fixed Chamber Knife JD1777 John Deere For use A steel knife used in the chamber area of the square baler. This is the fixed / stationary knife. Used in the 200, 300 and 400 series balers. Notes 320mm long 80mm at widest part 115mm from hole to hole...

€65.50 (€80.57 inc tax)

In stock

+ −

Cleaner / Stripper - Fits Various Models

CODE: BP14503

Baler Cleaner / Stripper BP14503 John Deere For use A baler cleaner / stripper used in the knotter area of various John Deere square balers. Length - 71mm Width (at widest part) - 66mm OEM - BP14503, FH312228 Linked parts: JDBP14503, BP14503,...

€16.20 (€19.93 inc tax)

In stock

+ −

Bilhook Cam

CODE: BP1600E

Bilhook Cam Lever BP1600E John Deere For use A cam / lever used in the knotter assembly of the John Deere square balers. OEM - BP1600E Notes Length - 118mm Width - 31mm Mounting Hole - 1 Linked parts: BP1600E, BP1600, JDBP1600E

€18.64 (€22.93 inc tax)

In stock

+ −

Twine Finger Assembly – Fits 342

CODE: AE32120 / AE46540

A steel baler needle suitablefor use in the John Deere 342 square balers.

€55.50 (€68.27 inc tax)

In stock

+ −

Complete Knotter Assembly

CODE: DC18246

Complete Knotter Assembly A complete knotter assembly used in various John Deere square balers listed below. Fits models – 214, 214T, 219, 219C, 221, 224, 224T, 332, 332AT, 332T, 336, 336AT, 336T, 342, 342AT, 342T, 346, 346T, 456, 456A, 456AT, 456T, 466, 466A, 466AT, 466AT,...

€475.00 (€584.25 inc tax)

In stock

+ −

Knotter Bilhook AE32450

CODE: AE32450

A baler bilhook suitable for use in the John Deere 219, 221, 224T, 330, 332, 336T, 339, 342T, 346T, 349T, 349WS, 359T and other square balers.

€75.00 (€92.25 inc tax)

In stock

+ −

Knife Arm - RASSPE

CODE: RS6020

Knife Arm (RASSPE) RS6020 For use A knife arm (RASSPE) used in the knotter area of the New Holland 200, 300, 900 series and D1000 square balers. Notes THIS IS A GENUINE RASSPE PART Linked parts: 6020, RS6020, 602001, RS602001, 18239, DC18239

€140.65 (€173.00 inc tax)

In stock

+ −

Plunger Bearing - Fits - 332, 336, 342

CODE: JD8680

A baler plunger bearing suitable for use in the John Deere 332, 336 and 342 square balers.

€30.50 (€37.52 inc tax)

In stock

+ −

Twine Disc – Fits Various Models

CODE: AE13424

A baler twine disc suitable for use in the John Deere 327, 328, 330, 332, 336, 337, 338, 339, 342, 346, 347, 348, 349, 359, 456, 459, 466, 467, 468 and CB300 square balers.

€58.50 (€71.96 inc tax)

In stock

+ −

Twine Retainer

CODE: AE29900

John Deere Twine Retainer Fits Various Models OEM – AE29900, FH312133, E79419, AE13266 Linked parts: baler, harvest, GRASS, john deere, finger, link, twine finger, hay

€31.50 (€38.75 inc tax)

In stock

+ −

Plunger Pin

CODE: CC17210

Pin For use A pin / bolt used in the plunger section of the John Deere 342, 342AT, 342T, 349, 349T, 359, 359T, 456, 456T, 466, 466T square balers. OEM - CC17210, CC17210.1 Notes Length - 106mm Diameter - 38mm Linked parts: JDCC17210, CC17210

€48.50 (€59.66 inc tax)

In stock

+ −

Chamber Wedge

CODE: 49442

John Deere Chamber Wedge / Restrictor / Grater For use A steel plate used in the chamber area of the John Deere baler. Length - 337mm Width - 187mm Thickness - 2.5mm Mounting Holes - 4 Notes There are 2 different plates used in each baler. Use this part ( 49442...

€16.50 (€20.30 inc tax)

In stock

+ −

Chamber Wedge

CODE: 14448

John Deere Chamber Wedge / Restrictor / Grater For use A steel plate used in the chamber area of the John Deere baler. Length - 338mm Width - 190mm Thickness - 3mm Mounting Holes - 4 Notes There are 2 different plates used in each baler. Use this part ( 14448 )...

€16.80 (€20.66 inc tax)

In stock

+ −

Centre Bearing - Fits - 200, 300, 400 series

CODE: 9301

Centre Bearing For use A ball bearing used in the John Deere 200, 300 and 400 series square balers. OEM - JD10089 / JD9213 / JD9301 NEW HOLLAND - 134384 Linked parts: 47192, 88507, JD9301

€26.50 (€32.60 inc tax)

In stock

+ −

Ball Bearing

CODE: JD39103

Ball Bearing JD39103 John Deere For use A ball bearing used in the pick up cam of the John Deere square balers. Fits - 100 series baler OEM - JD39103 Notes There are 2 of these in each baler Linked parts: JD39103

€22.50 (€27.68 inc tax)

In stock

+ −

Pick Up Tine - Fits - 332, 342, 346, 336, 456, 466

CODE: E41833

A baler pick up tine suitable for use in the John Deere 332, 342, 346, 336, 346, 456, 466 and 300 square balers.

€2.80 (€3.44 inc tax)

In stock

+ −