Bestsellers - Mc Daid Agri Spares

Knotter

CODE: 1120.72.08.01

Complete Knotter Linked parts: 1120.72.08.01, 1120720801

€700.00 (€861.00 inc tax)

In stock

+ −

SPACER

CODE: 0910.90.12.00

Spacer Linked parts: 0910.90.12.00, 0910901200

€3.20 (€3.94 inc tax)

In stock

+ −

Aluminium Support - AP38-AP530 - 1109.22.11.03

CODE: 1109.22.11.03

Aluminium Support Linked parts: 1109.22.11.03, 1109221103, 0762.58, 076258

€115.00 (€141.45 inc tax)

In stock

+ −

Welger Sprocket - 0720010000

CODE: 0720.01.00.00

Sprocket Linked parts: 0720.01.00.00, 0720010000

€45.00 (€55.35 inc tax)

In stock

+ −

Welger Regulator Screw - 1105221106

CODE: 1105221106

Welger Regulator Screw Linked parts: 1105221106, 1105.22.11.06

€35.00 (€43.05 inc tax)

In stock

+ −

Pinion and pinion gear - AP52, AP53, AP400, AP430, AP500, AP530

CODE: 0707.13.00.00

Pinion and pinion gear - Welger FITS - AP52, AP53, AP400, AP430, AP500, AP530 Linked parts: 0307.70.00.00, 0307700000, 0707.13.00.00, 0707130000

€600.00 (€738.00 inc tax)

In stock

+ −

Pick Up Tine - Fits - 120, 124, 128

CODE: 585136M1

Pick Up Tine 585136M1 Massey Ferguson For use A pick up tine used in the Massey 120, 124, 128 square balers. Linked parts: 585136M1

€2.50 (€3.08 inc tax)

In stock

+ −

Pick Up Tine - Fits - 10/8, 15/8, 20/8

CODE: 781943m1

Pick Up Tine 781943m1 Massey Ferguson For use A pick up tine used in the Massey 10/8, 15/8, 20/8 square balers. Linked parts: 781943m1, 152212M1

€2.50 (€3.08 inc tax)

In stock

+ −

Welger Wire Rope / Cable

CODE: 0936.18.65.00

Wire Rope / Cable NUMBER 13 IN DIAGRAM

€42.00 (€51.66 inc tax)

Out of stock

Bushing

CODE: 0920.12.37.00

Bushing Length - 35mm Outer Ø - 25mm Inner Ø - 20mm NUMBER 4 ON DIAGRAM

€14.00 (€17.22 inc tax)

In stock

+ −

Spring

CODE: 0940.63.84.00

Spring NUMBER 7 ON DIAGRAM

€24.00 (€29.52 inc tax)

In stock

+ −

Spring

CODE: 0940.63.71.00

Spring NUMBER 6 ON DIAGRAM

€36.00 (€44.28 inc tax)

In stock

+ −

Tension Spring for Knotter - 3.2x15x46

CODE: 0940.13.61.00

Tension Spring 3.2x15x46

€11.00 (€13.53 inc tax)

In stock

+ −

Twine Tensioner

CODE: 1116.22.14.00

Twine Tensioner Fits AP42, 48, 52, 53 series balers

€40.00 (€49.20 inc tax)

In stock

+ −

Keyway - 6x6x40

CODE: 0913.50.34.00

Keyway 6x6x40

€8.00 (€9.84 inc tax)

In stock

+ −

Pawl Lever

CODE: 1124.22.11.46

Pawl Lever 1124.22.11.46 Welger

€360.00 (€442.80 inc tax)

In stock

+ −

Knotter Bush - AP53, AP530, AP63, AP630, AP73, AP730, AP83, AP830

CODE: 0920.10.83.00

KNOTTER BUSH Fits - AP53, AP530, AP63, AP630, AP73, AP730, AP83, AP830

€12.00 (€14.76 inc tax)

In stock

+ −

Bush - Markant Models

CODE: 818049

Bush 818049 Claas Fits - Markant series balers Notes Outer Ø- 27.5mm Inner Ø - 24.9mm Linked parts: 818049, 818049.0, 008180491

€15.50 (€19.07 inc tax)

In stock

+ −

Tension Spring - AP12, 40, 41, 45, 52, 51, 61, 71

CODE: 0940127000

A spring used in the Welger AP61, AP63 and AP71 square balers.

€3.00 (€3.69 inc tax)

In stock

+ −

Welger RP202 Pick Up Band

CODE: 1721.42.05.01

€22.50 (€27.68 inc tax)

In stock

+ −

Needle Roller - AP

CODE: 0326020000

Welger Baler Needle Roller Linked parts: 0326.02.00.00, 59,101, 0326020000, 00001941.0, BP13365

€5.50 (€6.77 inc tax)

In stock

+ −

Plunger Bush - Markant

CODE: 008568

€4.50 (€5.54 inc tax)

In stock

+ −

Welger Shearbolt - AP45, AP61, AP71, AP12 - PACK OF 10

CODE: W3625

Welger Flywheel and Packer Shearbolt - AP45, AP61, AP71, AP12 - PACK OF 10

€25.00 (€30.75 inc tax)

In stock

+ −

Knotter Shearbolt - 278

CODE: 51430-3607

New Holland Knotter Shearbolt and lock nut - PACK OF 10 Fits models - 278

€15.00 (€18.45 inc tax)

In stock

+ −

Feeder Drive Shearbolt - 274, 276, 278, 286

CODE: 46047-3601

New Holland Feeder Drive Shearbolt and lock nut - PACK OF 10 Fits models - 274, 276, 278, 286

€15.00 (€18.45 inc tax)

In stock

+ −

Massey Ferguson Flywheel Shearbolt - 15, 20

CODE: 781842M1-3611

Flywheel Shearbolt - PACK OF 10 Fits - 15, 20 series balers

€15.00 (€18.45 inc tax)

In stock

+ −

Shearbolt Bush

CODE: 583038

SHEARBOLT BUSH Fits - 124 series

€33.50 (€41.21 inc tax)

In stock

+ −

Bomford Boot Flail KIT

CODE: 63-RM-17KIT

BOOT FLAIL - 63-M-17KIT KIT COMPRISES OF - 1 Boot Flail 1 Shackle 2 Internal Bush 1 Internal Bush 1 X 10mm Bolt and Nut Orig-part no. - 02.959.01, 7190463, 100113, 7770728SP, 140-810, 13800 Orig-part no. are for reference purposes only

€15.50 (€19.07 inc tax)

In stock

+ −

Haydog Spring

CODE: 7009335

Haydog Spring Linked parts: 7009335

€16.50 (€20.30 inc tax)

In stock

+ −

Flywheel Shearbolt - Fits - B46, B47, 430, 440

CODE: 181620

International Flywheel Shearbolt and Locknut - PACK OF 10 Linked parts: 181620, IH181620, 772336R91, 735986R11

€12.50 (€15.38 inc tax)

In stock

+ −

Clutch Spring - Fits 120, 124, 128, 220, 224, 228

CODE: 584048M1

Rubber Handle

€6.00 (€7.38 inc tax)

In stock

+ −

New Holland Pick Up Drive Chain - Primary Chain - 370

CODE: 536436

New Holland Pick Up Drive Chain - Primary / Long Chain Comes with 1 Jointing Link FITS - 370 series baler Linked parts: 536436

€42.00 (€51.66 inc tax)

In stock

+ −

Pick Up Bearing - Fits 120, 124, 128

CODE: 832198M1

Rubber Handle

€11.50 (€14.15 inc tax)

In stock

+ −

Knurl - Fits 124, 128, 220, 224

CODE: 918412

Rubber Handle

€20.50 (€25.22 inc tax)

In stock

+ −

Pick Up Tine

CODE: LS50007

Pick Up Tine Length - 190mm Width - 77mm Outer Ø of coil - 40mm Inner Ø of coil - 30mm Linked parts: RS7748, BL 59MAF, LS50007, BS7748, 59542, 59.542

€4.85 (€5.97 inc tax)

In stock

+ −

Plunger Knife - 58, 59, 159

CODE: BS7309

Plunger Knife The Moving knife used in the plunger of the Bamford 58, 59 and 159 series square balers. Length - 336mm Width of knife at widest part - 115mm Linked parts: BS7309

€95.00 (€116.85 inc tax)

In stock

+ −

Twine Disc - Fits - 120, 124, 128, 220, 224, 228

CODE: 918008M91

Twine Disc 918008M91 Massey Ferguson A twine disc used in the knotter area of the Massey Ferguson 120, 124, 128, 220, 224 and 228 square balers. Linked parts: 918012M1, 918008M91, 918027M2

€220.00 (€270.60 inc tax)

In stock

+ −

Complete Twine Tension Assembly

CODE: 584287M1

Twine Tension Assembly Fits - 120, 124, 128, 220, 224 and 228 series square baler Linked parts: 584287M1, 584287

€36.50 (€44.90 inc tax)

In stock

+ −

Plunger Bearing Bolt

CODE: 583949M3

Plunger Bearing Bolt Fits - 120, 124, 128, 220, 224 and 228 series square baler Length - 86mm Linked parts: 583949M3, 583949

€36.50 (€44.90 inc tax)

In stock

+ −

Haydog Spring - Fits 10/8, 15/8 and 20/8 series square baler

CODE: 642737M1

Haydog Spring

€10.50 (€12.92 inc tax)

In stock

+ −

Haydog Spring - Fits 120, 124, 128, 220, 224, 228 series square baler

CODE: 584073M1

Haydog Spring

€10.50 (€12.92 inc tax)

In stock

+ −

Feeder Connector - Fits - 376, 377, 378, 386, 940 and 945 series

CODE: 535582

Feeder Connector 535582 New Holland A feeder connector used in the New Holland 376, 377, 378, 386, 940 and 945series square balers. Linked parts: 80535582, 535582, 535590, 80535590

€160.00 (€196.80 inc tax)

In stock

+ −

Plunger Knife

CODE: 538540

Plunger Knife The moving plunger knife used in the Jones MK10 and MK12 series square balers. Length - 335mm Width - 115mm Distance between mounting holes - 110mm and 135mm Number of Mounting holes - 3

€85.50 (€105.17 inc tax)

In stock

+ −

Pick Up Cam - Fits - 276, 376 and 377 series balers

CODE: 158514

PICK UP CAM 158514 NEW HOLLAND A pick up cam used in the New Holland 276, 376, 377 series balers. Linked parts: 158514, 80158514

€275.00 (€338.25 inc tax)

In stock

+ −

Plunger Stop Spring

CODE: 655919R1

International Plunger Stop Spring Fits - 430, 440 series balers Linked parts: 655919R1, 655919R, IH655919R1

€17.50 (€21.53 inc tax)

In stock

+ −

Haydog

CODE: 662007R2

International Haydog Fits - 430, 435, 440, 445, B46 and B47 series balers Linked parts: 662007, IH662007, 662007R2

€39.50 (€48.59 inc tax)

Out of stock

Feeder Finger Spring

CODE: 662632R1

International Feeder Finger Spring Fits - 430, 435, 440, 445 series balers Linked parts: 662632r, 662632r1

€18.50 (€22.76 inc tax)

In stock

+ −

Tension Spring - AP45, AP61, AP71

CODE: 1115040112

Tension spring for the chamber - Fits AP45, AP61, AP71 series baler NOTE - THIS SPRING SCREWS IN AT THE BOTTOM Linked parts: 1105.04.01.12, 1105040112, 1115.04.01.18, 1115040118

€110.00 (€135.30 inc tax)

In stock

+ −

Needle Brake - AP41 AP45 AP52 AP53 AP61 AP530 series baler

CODE: 1105291000

Needle Brake - AP 41 AP 45 AP 52 AP 53 AP 61 AP 530 series baler Linked parts: 1105.29.10.00, 1105291000

€110.00 (€135.30 inc tax)

In stock

+ −

Welger Flywheel / Packer Shearbolt - AP61, AP52, AP53, AP63, RP150, RP180 - PACK OF 10

CODE: W0901105001-11104

Welger Flywheel / Packer Shearbolt - PACK OF 10 Linked parts: 0901.10.50.01, 0901105001

€30.00 (€36.90 inc tax)

In stock

+ −

Pick Up Tine - AP630 and RP Models

CODE: 0940.52.25.00

Pick Up Tine AP630 and RP Models A pick up tine used in the Welger AP630 and RP series square balers. Notes Length - 190mm Width - 68mm Outer Ø of coil - 40mm Thickness - 5mm Linked parts: 0940522500, 0940522900, 0940.52.25.00, 0940.52.29.00, 0940.52.70.00,...

€2.50 (€3.08 inc tax)

In stock

+ −

Bale Counter Clock

CODE: 622A

Bale Counter Clock Comes complete with spring

€25.50 (€31.37 inc tax)

In stock

+ −

Trip Spring - Markant

CODE: 800445

€10.50 (€12.92 inc tax)

In stock

+ −

Trip Spring - Markant

CODE: 002136

€9.00 (€11.07 inc tax)

In stock

+ −

Clutch Disc Markant 41, 51, 55, 65

CODE: 808202

Clutch Disc for Markant 41, 51, 55, 65 series square balers Outer Ø - 165 mm Inner Ø - 75mm Thickness - 6mm. Linked parts: 808202, 0008082023, 00808202, 808202.3, 8082023

€25.50 (€31.37 inc tax)

In stock

+ −

Joiner Hose - 6"

CODE: 8843

Straight hose joiner for assembling two hoses together using suitable bolt type hose clips Finish: galvanised 6"

€16.26 (€20.00 inc tax)

Out of stock

Plunger Bush - Fits - 120, 124, 128, 220, 224, 228

CODE: 831103M1

Plunger Bush 831103M1 Massey Ferguson A bush used in the plunger in the Massey Ferguson 120, 124, 128, 220, 224 and 228 series square balers. Height - 52mm Outer Ø - 37mm Inner Ø - 32mm Linked parts: 831103m, 831103m1

€31.50 (€38.75 inc tax)

In stock

+ −

Gear - Fits - 120, 124, 128, 220, 224, 228

CODE: 918012M91

Gear 918012M1 Massey Ferguson A gear used in the knotter area of the Massey Ferguson 120, 124, 128, 220, 224 and 228 series square balers. Notes Number of teeth - 9 Height - 7mm Inner Diameter - 4.5mm Linked parts: 918012M91, 918012M1, 918012M

€22.50 (€27.68 inc tax)

In stock

+ −

Knotter Gear - Fits - 120, 124, 128, 220, 224, 228

CODE: 918027m91

Knotter Gear 918027M2 Massey Ferguson A gear used in the knotter area of the Massey Ferguson 120, 124, 128, 220, 224 and 228 series square balers. Notes Number of teeth - 18 Inner Diameter - 15mm Linked parts: 150927M6

€29.50 (€36.29 inc tax)

In stock

+ −

Knotter Spring - 430, 435, 440, 445

CODE: 201637C1

Knotter Spring Overall Length - 185mm Width at widest part - 25mm Fits - 430, 435, 440, 445 series balers Linked parts: 201637c1, 201642c1

€24.50 (€30.14 inc tax)

In stock

+ −

Knurl

CODE: 3100851

Knurl Fits - B47, 430, 440 Linked parts: 3100851, 3100851R1

€18.50 (€22.76 inc tax)

In stock

+ −

Retainer Bilhook Cam Spring

CODE: 131DA

International Retainer Bilhook Cam Spring Length - 39mm External Ø - 12mm Fits - 430, 440 series balers Linked parts: U13033, 13033

€8.50 (€10.46 inc tax)

In stock

+ −

Clutch Disc - Fits - 332, 336, 342, 346

CODE: AE23860

CLUTCH DISC Inner Ø - 31mm Outer Ø - 200 Number of Splines - 21 Thickness - 6mm Height - 34mm Fits - 332, 336, 342, 346, John Deere Mower - 1320, 1326, 1327 Linked parts: AE23860, DC17783

€42.50 (€52.28 inc tax)

In stock

+ −

Tine Holder - AP12, AP41, RP235, RP245

CODE: 03383000

TINE HOLDER Fits - AP and RP models Linked parts: 0338.30.00.00.01, 033830000001, 0338300001, 0338.30.00.01

€5.50 (€6.77 inc tax)

In stock

+ −

Knotter Cam Wheel

CODE: 3100001R1

KNOTTER CAM WHEEL Fits - 422, 428, 430, 435, 440, 445 series baler Linked parts: 3100001R1, 667819R1, 668791R2

€89.50

In stock

+ −

Bilhook Cam Spring

CODE: U13033

INTERNATIONAL BILHOOK CAM SPRING Length - 37mm Outer Ø - 17mm Fits - 430, 435, 440, 445 Linked parts: U13033, 13033

€8.50 (€10.46 inc tax)

In stock

+ −

Knotter Crown Wheel - 440 series

CODE: 662037R1

KNOTTER CROWN WHEEL Number of Mounting Holes - 3 Fits - 440 series Baler Linked parts: 662037R1, 662037

€110.50 (€135.92 inc tax)

In stock

+ −

RASSPE Billhook - 118mm

CODE: RS3765K

RASSPE Bilhook A bilhook used in the knotter section of the International square balers. Length - 118mm GENUINE RASSPE PART Linked parts: RS3765, RS3765K

€125.50 (€154.37 inc tax)

Out of stock

Pick Up / Cam Follower Arm

CODE: DC18667

PICK UP / CAM FOLLOWER ARM Fits - 219, 221, 332, 339, 342, 346, 349, 359, 459, 456, 466, 224, 336, 327, 328, 337, 338, 347, 467, 468 series balers Linked parts: DC18667, 18667

€42.50 (€52.28 inc tax)

In stock

+ −

Bush

CODE: E45511

BUSH NUMBER 10 ON DIAGRAM FITS - 332, 336, 342, 346, 359, 459 series balers Linked parts: E45511, 45511

€25.50 (€31.37 inc tax)

In stock

+ −

Knotter Brake Disc

CODE: AE23994

KNOTTER BRAKE DISC Number 15 on diagram Fits - 327, 332, 336, 337, 339, 342, 346, 349, 359, 459, Linked parts: AE23994, 23994

€48.50 (€59.66 inc tax)

In stock

+ −

Knotter Gear - Fits - 422, 428, 430, 435, 440, B46, B47

CODE: 495192R1

Knotter Gear 495192R1 International For use A gear used in the knotter area of the International square balers. Number of Teeth - 6 Number of Mounting Holes - 1 Linked parts: 495192R1, 495192R

€36.50 (€44.90 inc tax)

In stock

+ −

FLYWHEEL BUSH

CODE: BP14006

JOHN DEERE FLYWHEEL BUSH Height - 49mm Outer Diameter - 70mm Linked parts: BP14006

€19.50 (€23.99 inc tax)

In stock

+ −

Shearbolt Bush

CODE: BP14124

SHEARBOLT BUSH Length - 32mm Outer Diameter - 25mm Linked parts: BP14124

€10.50 (€12.92 inc tax)

In stock

+ −

Topper Bush - Ø30 x Ø20mm

CODE: 208G

TOPPER BUSHING Outer Ø - 30mm Inner Ø - 20mm Height - 25mm Linked parts: topper, major, bush

€4.50 (€5.54 inc tax)

In stock

+ −

Pick Up Band - Fits - 120, 124, 128

CODE: 584759M2

PICK UP BAND 584759M2 MASSEY FERGUSON For use A pick up band used in the Massey 120, 124, 128 square balers. Linked parts: 584759M2, 594759M2

€27.50 (€33.83 inc tax)

In stock

+ −

HAYDOG - Fits 200, 300, 900 series

CODE: 167165

HAYDOG 167165 NEW HOLLAND A haydog used in the Chamber area of the New Holland 200, 300 and 900 square balers. Linked parts: 167165, 80167165, 132415, 80132415

€45.50 (€55.97 inc tax)

In stock

+ −

Plunger Bearing - 370, 376, 377, 378 series

CODE: 80535664

Plunger Bearing Outer Diameter - 63.5mm Width - 22.5mm Length - 57mm Thread - M20 x 1.5 Fits - 370, 376, 377, 378 series balers OEM - 450310, 535664, 700051671, 80450310, 861325, 80535664 Linked parts: 80535664, 535664, 450310, 80450310, 861325, 700051671

€45.50 (€55.97 inc tax)

In stock

+ −

Main Plunger Bearing – 3/4" UNF

CODE: AE30220F535659g

Main Plunger Bearing - 3/4" UNF Thread For use A plunger bearing used in various square balers. Length -57mm Diameter - 63.5mm Notes This bearing also fits Massey Ferguson, John Deere and New Holland Balers. Linked parts: JD58101, 622426M3,...

€48.50 (€59.66 inc tax)

In stock

+ −

Plunger Bearing

CODE: BS6210

Bamford Plunger Bearing Length - 66mm Width - 63.5mm Thread - 5/8" (15.9) Thickness - 23mm Linked parts: BS6210, 58117, 58.117

€78.50 (€96.56 inc tax)

In stock

+ −