Bestsellers - Mc Daid Agri Spares

Hexagon nut - M12x1,75

CODE: 80-3012

Thread:M12x1,75

€0.50 (€0.62 inc tax)

In stock

+ −

Bolt for rotary mower blades - M12x1,75 - 12.9

CODE: 80-3018

Quality:12.9 Thread:M12x1,75

€1.40 (€1.72 inc tax)

In stock

+ −

Holding Pin for PZ-ZWEEGERS Mower

CODE: 80-2019

BLADE HOLDER FOR PZ-ZWEEGERS MOWER - 80-2019 Country of origin: Germany For use Weight - 0.024 kg Thickness - 11 mm Orig-part no. - PZ57.2 Orig-part no. are for refrence purposes only

€1.66 (€2.04 inc tax)

In stock

+ −

Bush - 61

CODE: 63-BOM-61

BUSH - 63-BOM-61 Weight - 0.050 kg Orig-part no. - 02.807.01, 5496369, 100109 Orig-part no. are for reference purposes only

€1.80 (€2.21 inc tax)

In stock

+ −

Plough bolt M12 x 1,75 x 35 with hexagon nut

CODE: 1235KV

Quality:10.9 Thread:M12x1,75 D:22 L:35 S:19 Nut in DIN:934-8 c:5 x:90 degrees m:10

€1.80 (€2.21 inc tax)

In stock

+ −

Y-blade

CODE: 63-AGR-51

€2.00 (€2.46 inc tax)

In stock

+ −

Bolt for rotary mower blades - M12x1,75 - 12.9

CODE: 80-3014

Quality:12.9 Thread:M12x1,75

€2.20 (€2.71 inc tax)

In stock

+ −

Pick Up Tine - AP Models

CODE: 034312

Pick Up Tine 034312 Welger For use A pick up tine used in the Welger AP series square balers. Notes Length - 190mm Width - 78mm Colour may vary Linked parts: W034312, 0940522100, 0343.12, 0343.17, 0940

€2.30 (€2.83 inc tax)

In stock

+ −

Bolt Set For Knotter Knife

CODE: KIT2

A set of 2 bolts used for holding the knotter knife in place. This is used in the Knotter Area of various Square Balers. THIS SET CONTAINS - 2 x Bolts THIS IS A GENUINE RASSPE PART

€2.37 (€2.92 inc tax)

In stock

+ −

Pick Up Tine – Fits – 276, 370, 376, 377, 841, 920, 930, 935, 940

CODE: 80131673

Pick Up Tine 80131673 New Holland For use A pick up tine used in the New Holland 276, 370, 376, 377, 841, 920, 930, 935 and 940 square balers. Notes Length: 190mm Width - 71mm Linked parts: 131673, 86632007, 87394243, 87394242, 87035574, 80131673, 80916061,...

€2.50 (€3.08 inc tax)

In stock

+ −

Diet Feeder Knife / Straw Chopper Blade

CODE: 70-111

DIET FEEDER KNIFE - 70-111 Length - 81mm Weight - 0.093 kg Thickness - 3mm Orig-part no. - 3000471, 3000655 Orig-part no. are for reference purposes only Linked parts: 3000471, 3000655

€2.50 (€3.08 inc tax)

In stock

+ −

Pick Up Tine - AP630 and RP Models

CODE: 0940.52.25.00

Pick Up Tine AP630 and RP Models A pick up tine used in the Welger AP630 and RP series square balers. Notes Length - 190mm Width - 68mm Outer Ø of coil - 40mm Thickness - 5mm Linked parts: 0940522500, 0940522900, 0940.52.25.00, 0940.52.29.00, 0940.52.70.00,...

€2.50 (€3.08 inc tax)

In stock

+ −

Pick Up Tine - Fits - 10/8, 15/8, 20/8

CODE: 781943m1

Pick Up Tine 781943m1 Massey Ferguson For use A pick up tine used in the Massey 10/8, 15/8, 20/8 square balers. Linked parts: 781943m1, 152212M1

€2.50 (€3.08 inc tax)

In stock

+ −

Pick Up Tine - Fits - 120, 124, 128

CODE: 585136M1

Pick Up Tine 585136M1 Massey Ferguson For use A pick up tine used in the Massey 120, 124, 128 square balers. Linked parts: 585136M1

€2.50 (€3.08 inc tax)

In stock

+ −

Bolt for rotary mower blades - M12x1,75 - 12.9

CODE: 80-3027

Quality:12.9 Thread:M12x1,75

€2.55 (€3.14 inc tax)

In stock

+ −

Pick Up Tine - Camless Side Tine

CODE: 0940527200

PICK UP TINE (CAMLESS SIDE TINE ) 0940.52.72.00 WELGER For use A pick up tine used in the pick up area of the Welger square balers. Notes Length - 235mm 5 TINES REQUIRED PER SIDE Linked parts: 0940.52.72.00, 0940527200

€2.60 (€3.20 inc tax)

In stock

+ −

Diet Feeder Knife / Straw Chopper Blade

CODE: 70-137

DIET FEEDER KNIFE - 70-137 Length - 80mm Weight - 0.098 kg Thickness - 3mm Orig-part no. - A7153002, 60613007 Orig-part no. are for reference purposes only Linked parts: 60613007, A7153002

€2.65 (€3.26 inc tax)

Out of stock

Pick Up Tine - Fits - 332, 342, 346, 336, 456, 466

CODE: E41833

A baler pick up tine suitable for use in the John Deere 332, 342, 346, 336, 346, 456, 466 and 300 square balers.

€2.80 (€3.44 inc tax)

In stock

+ −

Pick Up Tine - Fits - B46,B47, 422, 430, 440

CODE: 772328R

Pick Up Tine 772328R International For use A pick up tine used in the International square balers. Linked parts: MA74528, 772328R, 772328R1

€2.80 (€3.44 inc tax)

In stock

+ −

Mc HALE Hay Tine - Galvanized - Pick-up FUSION

CODE: 15-MCH-01

Hay tine for McHale baler - 15-MCH-01 Length - 180mm Weight - 0.235 kg Width - 67mm Orig-part no. - CTN00008 Orig-part no. are for reference purposes only Fits machine type - Fuision 1, 2, 3 - F5000 Series

€2.80 (€3.44 inc tax)

In stock

+ −

Diet Feeder Knife / Straw Chopper Blade

CODE: 70-237

DIET FEEDER KNIFE - 70-237 Length - 62mm Weight - 0.070 kg Thickness - 4mm

€2.90 (€3.57 inc tax)

In stock

+ −

Bolt with Self-Locking Nut - 5/8''UNF (10.9)

CODE: 63-1684

BOLT WITH SELF-LOCKING NUT - 63-1684 Country of origin: Germany For use Thread - 5/8''UNF Weight - 0.194 kg Quality - 10.9 Length - 84mm Length of thread - 21mm Orig-part no. - 0577510, 0596806, Schraube T7943, Mutter T7942 Orig-part no. are for...

€2.90 (€3.57 inc tax)

In stock

+ −

Pick Up Tine – Fits Models Markant 40 – 50, 55, 60, 65

CODE: 807297

Pick Up Tine 807297 Claas A pick up tine used in the Claas Markant 40-50, Markant 55, Markant 60 and Markant 65 square balers. Notes Length - 205mm Width - 73mm Coil Diameter - 29mm Linked parts: CL807297, 907297, 807237, 000807237, 807237.0, 807297

€2.95 (€3.63 inc tax)

In stock

+ −

Plunger Nut - Fits All Model - 3/4"

CODE: 58153

A plunger nut used in square balers.

€3.00 (€3.69 inc tax)

In stock

+ −

Internal Bush - 62

CODE: 63-BOM-62

INTERNAL BUSH - 63-BOM-62 Country of origin: Germany For use Dimensions - Displayed in image. Weight - 0.020 kg Orig-part no. - 02.801.01, 100107 Orig-part no. are for reference purposes only

€3.00 (€3.69 inc tax)

In stock

+ −

Tension Spring - AP12, 40, 41, 45, 52, 51, 61, 71

CODE: 0940127000

A spring used in the Welger AP61, AP63 and AP71 square balers.

€3.00 (€3.69 inc tax)

In stock

+ −

Plunger Nut - Fits All Model - M18 x 2,5

CODE: 58154

A plunger nut used in square balers.

€3.10 (€3.81 inc tax)

In stock

+ −

Flail

CODE: 63-ROU-57

€3.10 (€3.81 inc tax)

In stock

+ −

KRONE Hay Tine - Combi Pack - Easy Flow - Turbo - Round Pack - Vario Pack - Titan - 4XL - 5XL - XXL

CODE: 15-KRO-09

Hay tine for Krone - 15-KRO-09 Length - 143mm Weight - 0.160 kg Width - 62mm Orig-part no. - 9381480 Orig-part no. are for reference purposes only Fits machine type - Combi Pack - Easy Flow - Turbo - Round Pack - Vario Pack - Titan - 4XL - 5XL - XXL

€3.20 (€3.94 inc tax)

In stock

+ −

SPACER

CODE: 0910.90.12.00

Spacer Linked parts: 0910.90.12.00, 0910901200

€3.20 (€3.94 inc tax)

In stock

+ −

Benman Stanley Spare Blades - 10 pack

CODE: 71081

Benman Stanley Blades - 10 pack

€3.35 (€4.12 inc tax)

In stock

+ −

Diet Feeder Knife / Straw Chopper Blade

CODE: 70-112

DIET FEEDER KNIFE - 70-112 Length - 66mm Weight - 0.093 kg Thickness - 3mm Orig-part no. - 3000472, 3000656 Orig-part no. are for reference purposes only Linked parts: 3000472, 3000656

€3.45 (€4.24 inc tax)

In stock

+ −

Shearbolt

CODE: 0901.98.10.00

Shearbolt 0938961700 Welger For use A shearbolt used in the Welger square balers. Size - M8x30mm Linked parts: 0901981000, 0901.98.10.00

€3.50 (€4.31 inc tax)

In stock

+ −

Bush Ï25 - 24

CODE: 63-ZZZ-24

BUSH - 63-ZZZ-24 Country of origin: Germany For use Dimensions - Displayed in image. Weight - 0.083 kg Orig-part no. - 71.142.23, 184.106 Orig-part no. are for reference purposes only

€3.60 (€4.43 inc tax)

In stock

+ −

Diet Feeder Knife - 144

CODE: 70-144

DIET FEEDER KNIFE - 70-144 Length - 77mm Weight - 0.090 kg Thickness - 3mm

€3.65 (€4.49 inc tax)

In stock

+ −

Diet Feeder Knive, right - 123

CODE: 70-123

DIET FEEDER KNIFE - 70-123 Length - 90mm Weight - 0.110 kg Thickness - 4mm

€3.65 (€4.49 inc tax)

In stock

+ −

Y-blade

CODE: 63-FLN-02

€3.75 (€4.61 inc tax)

In stock

+ −

Flywheel Clutch Spring - Fits - 200 series

CODE: 28284

Flywheel Clutch Spring 28284 New Holland Notes Length - 45mm Outer Diameter - 20mm Linked parts: 28284, 80028284

€3.80 (€4.67 inc tax)

In stock

+ −

Spring

CODE: 0940.10.71.00

Spring 0940.10.71.00 Welger Length - 41mm Linked parts: 0940.10.71.00, 0940107100

€4.00 (€4.92 inc tax)

In stock

+ −

Braided Rope - 9mm

CODE: 19097

Braided Rope - 9mm

€4.15 (€5.10 inc tax)

In stock

+ −

Diet Feeder Knife - 163

CODE: 70-163

DIET FEEDER KNIFE - 70-163 Length - 53mm Weight - 0.088 kg Thickness - 3mm

€4.25 (€5.23 inc tax)

In stock

+ −

Haydog Spring - AP and D models

CODE: 0940.24.31.00

HAYDOG SPRING 0940.24.31.00 WELGER For use A spring used in the chamber area of Welger square balers. Notes Length - 104mm Outer Diameter - 29mm Inner Diameter - 22mm Linked parts: 0940.24.31.00, 0940243100

€4.30 (€5.29 inc tax)

In stock

+ −

Knotter Spring - Fits - Various Models

CODE: RS3789

Knotter Spring RS3789 New Holland For use A compression spring used in the knotter area of New Holland square balers. Notes Length - 31mm Outer Diameter - 16mm Inner Diameter - 12mm THIS IS A GENUINE RASSPE PART Linked parts: RS3789, 3103538R1,...

€4.35 (€5.35 inc tax)

In stock

+ −

Knotter Spring - Fits - Various Models

CODE: RS3789

Knotter Spring RS3789 International For use A compression spring used in the knotter area of International square balers. Notes Length - 31mm Outer Diameter - 16mm Inner Diameter - 12mm THIS IS A GENUINE RASSPE PART Linked parts: RS3789, 3103538R1,...

€4.35 (€5.35 inc tax)

In stock

+ −

M20 X 60 BOLT AND NUT SET

CODE: M2060

M20 X 60 BOLT, NUT AND FLAT WASHERS SET CONSISTS OF - 1 X M20x60 Bolt - Strength 8.8 1 x M20 Locknut 2 x M20 Flat Washers FITS MODELS – BRIDGEWAY, BELMAC, CONOR, FLEMING, HI-SPEC, NUGENT For use WITHOUT Shredder / Slasher Blade

€4.50 (€5.54 inc tax)

In stock

+ −

Hay Tine - Pressen: 376 - 377 - 378 - 644 - 548 - 565 - 570 - 575 - 540 644 - 650 - 645 - 648 - 658 - 865 - BB 930 - 935 - 940 945 - 5820 - 5850 - 5880

CODE: 15-NEH-01

HAY TINE FOR NEW HOLLAND - 15-NEH-01 Length - 188mm Weight - 0.240 kg Width - 73mm Orig-part no. - 80131673 Orig-part no. are for reference purposes only Fits machine type - Pressen: 376 - 377 - 378 - 644 - 548 - 565 - 570 - 575 - 540 644 - 650 - 645 - 648 - 658 -...

€4.50 (€5.54 inc tax)

In stock

+ −

Flywheel Clutch Spring - Fits - 370

CODE: 126758

Flywheel Clutch Spring 126758 New Holland Notes Length - 58mm Outer Diameter - 26mm Linked parts: 126758, 80126758

€4.50 (€5.54 inc tax)

In stock

+ −

Topper Bush - Ø30 x Ø20mm

CODE: 208G

TOPPER BUSHING Outer Ø - 30mm Inner Ø - 20mm Height - 25mm Linked parts: topper, major, bush

€4.50 (€5.54 inc tax)

In stock

+ −

Plunger Bush - Markant

CODE: 008568

€4.50 (€5.54 inc tax)

In stock

+ −

Shackle - ROU-75

CODE: 63-ROU-75

Linked parts: 5.556.05, 555605

€4.56 (€5.61 inc tax)

In stock

+ −

Plunger Bearing Washer

CODE: 0925312000

Plunger Bearing Washer 0925312000 Welger Linked parts: 0925312000, 0925.31.20.00

€4.60 (€5.66 inc tax)

In stock

+ −

Spring Idler / Twine Spring

CODE: 805141

Spring Idler / Twine Guide 805141 Claas A baler spring idler / twine guide used in the Claas square balers. Notes Length - 515mm Linked parts: 805141, 805140.0, 808258

€4.80 (€5.90 inc tax)

In stock

+ −

Pick Up Tine

CODE: LS50007

Pick Up Tine Length - 190mm Width - 77mm Outer Ø of coil - 40mm Inner Ø of coil - 30mm Linked parts: RS7748, BL 59MAF, LS50007, BS7748, 59542, 59.542

€4.85 (€5.97 inc tax)

In stock

+ −

Mini Pick and Hock Set

CODE: MX2100014

McAnax Mini Pick and Hock Set - MX2100014

€5.00 (€6.15 inc tax)

In stock

+ −

Bomford Boot Flail

CODE: 63-RM-17

BOOT FLAIL - 63-M-17 Weight - 0.440 kg Dimensions - Displayed in image. Orig-part no. - 02.959.01, 7190463, 100113, 7770728SP, 140-810, 13800 Orig-part no. are for reference purposes only

€5.00 (€6.15 inc tax)

In stock

+ −

Straight blade

CODE: 63-CEL-29

€5.00 (€6.15 inc tax)

In stock

+ −

FARENDLOSE Hay Tine - Far-01

CODE: 15-FAR-01

HAY TINE FOR FARENDLOSE BALERS - 15-FAR-01 Length - 260mm Weight - 0.336 kg Width - 60mm Orig-part no. - 5-033 Orig-part no. are for reference purposes only

€5.10 (€6.27 inc tax)

In stock

+ −

M20 X 80 BOLT AND NUT SET

CODE: M2080

M20 X 80 BOLT, NUT AND FLAT WASHERS SET CONSISTS OF - 1 X M20x80 Bolt - Strength 8.8 1 x M20 Locknut 2 x M20 Flat Washers FITS MODELS – BRIDGEWAY, BELMAC, CONOR, FLEMING, HI-SPEC, NUGENT For use WITH Shredder / Slasher Blade

€5.50 (€6.77 inc tax)

In stock

+ −

Tine Holder - AP12, AP41, RP235, RP245

CODE: 03383000

TINE HOLDER Fits - AP and RP models Linked parts: 0338.30.00.00.01, 033830000001, 0338300001, 0338.30.00.01

€5.50 (€6.77 inc tax)

In stock

+ −

Needle Roller - AP

CODE: 0326020000

Welger Baler Needle Roller Linked parts: 0326.02.00.00, 59,101, 0326020000, 00001941.0, BP13365

€5.50 (€6.77 inc tax)

In stock

+ −

Bush - Ø34 x Ø20.5mm

CODE: 63-CON-96

BUSH - 63-CON-96 Country of origin: Germany Dimensions - Displayed in image. Weight - 0.180 kg Orig-part no. - 1096283 Orig-part no. are for reference purposes only

€5.80 (€7.13 inc tax)

In stock

+ −

Bush - Ø34 - Ø20mm

CODE: 63-CON-93

BUSH - 63-CON-93 Country of origin: Germany Dimensions - Displayed in image. Weight - 0.200 kg Orig-part no. - 1096260 Orig-part no. are for reference purposes only

€5.80 (€7.13 inc tax)

In stock

+ −

Diet Feeder Knives - 207

CODE: 70-207

DIET FEEDER KNIFE - 70-207 Length - 95mm Weight - 0.180 kg Width - 80mm Thickness - 5mm Orig-part no. - KD1560042, 94689530, 94832301 Orig-part no. are for reference purposes only Linked parts: 94689530, 94832301, KD1560042

€5.90 (€7.26 inc tax)

In stock

+ −

Bilhook Cam - Fits - AP Models

CODE: 03441900

Bilhook Cam 03441900 Welger For use A replacement part used in the knotter area of the Welger AP square balers. Notes Length - 98mm Width - 12mm Number of Mounting Holes - 3 Linked parts: 0940742700, 0344190000, 0344.19.00.00, 0940.74.27.00

€6.00 (€7.38 inc tax)

In stock

+ −

Clutch Spring - Fits 120, 124, 128, 220, 224, 228

CODE: 584048M1

Rubber Handle

€6.00 (€7.38 inc tax)

In stock

+ −

Y-blade

CODE: 63-SIC-12

€6.08 (€7.48 inc tax)

In stock

+ −

Straight blade

CODE: 63-CEL-26

€6.16 (€7.58 inc tax)

In stock

+ −

Shackle - BOM-72

CODE: 63-BOM-72

Linked parts: 05.895.01, 09.517.01, 100118, 0589501

€6.20 (€7.63 inc tax)

In stock

+ −

Spring - Fits - AP61, AP63, AP71

CODE: 0940516000

A spring used in the Welger AP61, AP63 and AP71 square balers.

€6.50 (€8.00 inc tax)

In stock

+ −

Flat Knotter Spring - Fits - Various Models

CODE: RS3776B

Flat Knotter Spring RS3776B New Holland For use A flat knotter spring used in various New Holland square balers. Notes Length - 103mm Number of Mounting Holes - 1 THIS IS A GENUINE RASSPE PART Linked parts: RS3776B, NHRS3776B

€6.50 (€8.00 inc tax)

In stock

+ −

Flat Knotter Spring - Fits - 425D, 435, 445

CODE: RS3776B

Flat Knotter Spring RS3776B International For use A flat knotter spring used in 425D, 435, 445 International square balers. Notes Length - 103mm Number of Mounting Holes - 1 THIS IS A GENUINE RASSPE PART Linked parts: RS3776B, NHRS3776B

€6.50 (€8.00 inc tax)

In stock

+ −

Hay Tine - 04

CODE: 15-JF-04

HAY TINE - 15-JF-04 Country of origin: Germany For use Length - 265mm Weight - 0.410 kg Width - 62mm Orig-part no. - 1433-0397, 14330397 Orig-part no. are for reference purposes only Fits machine type - HSR

€6.50 (€8.00 inc tax)

In stock

+ −

Spring

CODE: 61137

Spring For use A spring used in the New Holland square balers. Notes Overall Length - 90mm Coil Length - 56mm Linked parts: 61137, 61.137

€6.50 (€8.00 inc tax)

In stock

+ −

Y-blade

CODE: 63-MEA-10

€6.57 (€8.08 inc tax)

In stock

+ −

Straw Chopper Knife - Cranked

CODE: 70-246SC

€6.80 (€8.36 inc tax)

In stock

+ −

Twine Finger Spring – Fits –330, 332, 336, 339, 342, 346, 456, 466, 540, 545, 550

CODE: B27616/61128

Twine Finger Spring Overall Length - 99mm Length of Coil - 66mm Outer Diameter - 22mm Inner Diameter - 17mm Fits –330, 332, 336, 339, 342, 346, 456, 466, 540, 545, 550 Linked parts: B27616, 61128

€6.80 (€8.36 inc tax)

In stock

+ −

Shackle - ORS-09

CODE: 63-ORS-09

Linked parts: 7390013

€7.10 (€8.73 inc tax)

In stock

+ −

Shackle - BOM-75

CODE: 63-BOM-75

Linked parts: 7191332

€7.10 (€8.73 inc tax)

In stock

+ −

Twine Spring - AP12, AP40, AP41, AP45, AP50, AP51

CODE: 0940.51.41.00

Twine Spring 0940.51.41.00 Welger Linked parts: 0940514100, 0940.51.41.00, 0346.09.00.00, 0346090000

€7.10 (€8.73 inc tax)

In stock

+ −

Knotter Knife - AP and DELTA Models

CODE: 03642400

Knotter Knife 0364.24.00 Welger For use A knife used in the knotter area of the Welger AP and DELTA series square balers. Notes Length - 23mm Width - 16mm Linked parts: 0982.10.02.00, 0982100200, 0364.24.00, 03642400

€7.20 (€8.86 inc tax)

In stock

+ −

PZ-Zweegers - Hay Tine - Right Model - Zettrechwender Super Strela, DS 5000

CODE: 15-ZWE-05R

HAY TINE FOR PZ-ZWEEGERS - 15-ZWE-05R Length - 290mm Weight - 0.950 kg Width - 113mm Orig-part no. - PZ 190 Orig-part no. are for reference purposes only Fits machine type - Zettrechwender Super Strela, DS 5000

€7.50 (€9.23 inc tax)

In stock

+ −

PZ-Zweegers - Hay Tine - Left Model - Zettrechwender Super Strela, DS 5000

CODE: 15-ZWE-05L

HAY TINE FOR PZ-ZWEEGERS - 15-ZWE-05L Length - 290mm Weight - 0.950 kg Width - 113mm Orig-part no. - PZ 192 Orig-part no. are for reference purposes only Fits machine type - Zettrechwender Super Strela, DS 5000

€7.50 (€9.23 inc tax)

In stock

+ −

FELLA Hay Tine - Turboschwader (88-) TS 290 - TS 295 - TS 320 - TS 335 RDF - TS 330 -TS 335 DN - TS 415 RDF - TS 630 - TS 631

CODE: 15-FEL-04

HAY TINE FOR FELLA BALERS 15-FEL-04 Length - 590mm Weight - 1.148 kg Width - 87mm Orig-part no. - 160313 Orig-part no. are for reference purposes only Fits machine type - Turboschwader (88-) TS 290 - TS 295 - TS 320 - TS 335 RDF - TS 330 -TS 335 DN - TS 415 RDF - TS...

€7.50 (€9.23 inc tax)

In stock

+ −

Knotter Knife - AP530, AP630, AP730, AP830

CODE: 0982.10.03.00

Knotter Knife 0982.10.03.00 Welger A knife used in the knotter area of the Welger AP530, AP630, AP730, AP830 series square balers. Linked parts: 0982.10.03.00, 0982100300

€7.50 (€9.23 inc tax)

In stock

+ −

Knotter Knife

CODE: 000012

Knotter Knife 000012 Claas A knotter knife used in Claas square balers. Linked parts: 000012.00, CL000012, 00012, 000012

€7.90 (€9.72 inc tax)

In stock

+ −

Keyway - 6x6x40

CODE: 0913.50.34.00

Keyway 6x6x40

€8.00 (€9.84 inc tax)

In stock

+ −

Trip Arm Spring – Fits – 200, 300, 900 Series

CODE: 42427

A knotter spring used in the New Holland 200, 300 and 900 series square balers.

€8.05 (€9.90 inc tax)

In stock

+ −

ONLY AT MDAGRISPARES

Side Mount Beacon Bracket

CODE: 0067

SIDE MOUNT BEACON BRACKET Choosing Mc Daid Agri Spares Ltd for your vehicles Lighting systems is an easy one if you demand a long service life with sturdy design and easy installing on your vehicle for all kinds of light requirements.Our Products are suitable to agricultural &...

€8.13 (€10.00 inc tax)

In stock

+ −

NEW SEASON ONLY AT MDAGRISPARES

5L Hoof Proof Bucket - PACK OF 2

CODE: HP5L

Virtually indestructible range of buckets. They can withstand kicks and stomping. You can easily push these back into shape. Extremely durable.

€8.13 (€10.00 inc tax)

In stock

+ −

NIEMEYER Hay Tine - Right -HR 551-DH; HR 671-DH; HR 675-DH; HR 771; HR 785-DH; HR 821-DH; HR 905-GH; HR 1101-DHG; HR 1055

CODE: 15-NIE-01R

Hay tine for Niemeyer - 15-NIE-01R Length - 380mm Weight - 1.480 kg Width - 130mm Orig-part no. - 600.062 Orig-part no. are for reference purposes only Fits machine type - HR 451, 551, 671, 675, 785, 821, 771, 801, 905GH, 1055GH, 1101GH

€8.40 (€10.33 inc tax)

In stock

+ −

NIEMEYER Hay Tine - Left - HR 551-DH; HR 671-DH; HR 675-DH; HR 771; HR 785-DH; HR 821-DH; HR 905-GH; HR 1101-DHG; HR 1055-GH

CODE: 15-NIE-01L

Hay tine for Niemeyer - 15-NIE-01L Length - 380mm Weight - 1.480 kg Width - 130mm Orig-part no. - 600.061 Orig-part no. are for reference purposes only Fits machine type - HR 451, 551, 671, 675, 785, 821, 771, 801, 905GH, 1055GH, 1101GH

€8.40 (€10.33 inc tax)

In stock

+ −

Haydog Spring – 565, 570, 575 Series

CODE: 771477

Haydog Spring 80771477 New Holland For use A haydog spring used in the chamber area of the New Holland 565, 570 and 575 square balers. Linked parts: 86505745, 80771477, 771477

€8.50 (€10.46 inc tax)

In stock

+ −

Bale Counter Clock Key

CODE: 0995103300

Bale Counter Clock Key 0995103300 Welger Linked parts: 0995103300

€8.50 (€10.46 inc tax)

In stock

+ −

FRANSGARD Hay Tine - Right Model - Pick-Up - RV-300; RV-390

CODE: 15-FRA-03

HAY TINE FOR FRANSGARD 15-FRA-03 Length - 375mm Weight - 1.050 kg Width - 115mm Orig-part no. - 40251 Orig-part no. are for reference purposes only Fits machine type - RV-300; RV-390

€8.50 (€10.46 inc tax)

In stock

+ −

Knotter Knife - AP12, AP12K, AP40, AP41, AP42, AP45, AP51, AP52, AP61, AP71

CODE: 03640300

Knotter Knife 0364.03.00 Welger For use A knife used in the knotter area of the Welger AP12, AP12K, AP40, AP41, AP42, AP45, AP51, AP52, AP61, AP71 square balers. Linked parts: 0364030000, 0364.03.00.00, 0364.03, 036403

€8.50 (€10.46 inc tax)

In stock

+ −

Bilhook Cam Spring

CODE: U13033

INTERNATIONAL BILHOOK CAM SPRING Length - 37mm Outer Ø - 17mm Fits - 430, 435, 440, 445 Linked parts: U13033, 13033

€8.50 (€10.46 inc tax)

In stock

+ −

Retainer Bilhook Cam Spring

CODE: 131DA

International Retainer Bilhook Cam Spring Length - 39mm External Ø - 12mm Fits - 430, 440 series balers Linked parts: U13033, 13033

€8.50 (€10.46 inc tax)

In stock

+ −

RASSPE Roller - Fits - Various Models

CODE: RS3773

Roller RS3773 New Holland For use A roller used in the knotter area of various New Holland square balers. Notes Inner Diameter - 14mm Outer Diameter - 25mm Height - 13mm THIS IS A GENUINE RASSPE PART Linked parts: RS3773, 3103532R1, 700707887,...

€8.52 (€10.48 inc tax)

In stock

+ −

Twine Finger Spring - Fits- Various

CODE: 61124

Twine Finger Spring 29833 New Holland For use A twine finger spring used in various New Holland square balers. Notes Length - 145mm Outer Diameter - 20mm Linked parts: 29833, 61124, 143224

€8.52 (€10.48 inc tax)

In stock

+ −

RASSPE Roller - Fits - Various Models

CODE: RS3773

Roller RS3773 For use A roller used in the knotter area of various square balers. Notes Inner Diameter - 14mm Outer Diameter - 25mm Height - 13mm THIS IS A GENUINE RASSPE PART Linked parts: RS3773, 3103532R1, 700707887, 706523179

€8.52 (€10.48 inc tax)

In stock

+ −

String Guide

CODE: 786199M1

String Guide 781699M1 Massey Ferguson For use A string guide used in the knotter area of the Massey Ferguson square balers. Linked parts: 781699M1, 781699

€8.55 (€10.52 inc tax)

In stock

+ −

Flat Knotter Spring - Fits - Various Models

CODE: E52572

A steel baler needle suitable for use in various John Deere square balers.

€8.90 (€10.95 inc tax)

In stock

+ −

String Guide - Fits - Various Models

CODE: 60102

String Guide 28110 New Holland For use A string guide used in various New Holland square balers. Notes Outer Diameter - 43mm Inner Diameter - 13mm Width - 46mm Linked parts: 28110, 80028110

€9.00 (€11.07 inc tax)

In stock

+ −

Mc Connell F10 T-Flail

CODE: 63-RM-48

T-FLAIL - 63-RM-48 Weight - 0.970 kg Width - 60mm Orig-part no. - 7314366, 1840093C Orig-part no. are for reference purposes only

€9.00 (€11.07 inc tax)

In stock

+ −

Bomford T-Flail

CODE: 63-BOM-83

T-FLAIL - 63-BOM-83 Weight - 0.750 kg Width - 62mm Orig-part no. - 0990501, 46399.01 Orig-part no. are for reference purposes only

€9.00 (€11.07 inc tax)

In stock

+ −

PZ-Zweegers - Hay Tine - Flevo 480

CODE: 15-ZWE-08

HAY TINE FOR PZ-ZWEEGERS - 15-ZWE-08 Length - 360mm Weight - 0.890 kg Width - 105mm Orig-part no. - PZ 221 Orig-part no. are for reference purposes only Fits machine type - Flevo 480

€9.00 (€11.07 inc tax)

In stock

+ −

ABBEY BOLT, NUT, BUSHING AND WASHER KIT

CODE: ABYKIT

BOLT, NUT, BUSHING AND WASHER KIT 1 x Topper Flail Bushing 1 x Washer 1 x Bolt 1 x Self Locking Nut Suitable for - ABBEY TOPPERS

€9.00 (€11.07 inc tax)

In stock

+ −

Trip Spring - Markant

CODE: 002136

€9.00 (€11.07 inc tax)

In stock

+ −

Haydog Spring - Fits - 200, 300, 900 series

CODE: 771476

Haydog Spring 771476 New Holland For use A haydog spring used in the chamber area of the New Holland 200, 300 and 900 series square balers. Notes Length - 107mm Width - 72mm Outer Diameter of Coil - 30.5mm Linked parts: 173230, 133418, 86642329, 771476

€9.50 (€11.69 inc tax)

In stock

+ −

DEUTZ FAHR Hay Tine - Kreiselschwader KS 83D, KS 83DN, KS 85, KS 85D, KS 85DN, KS 90DN, KS 200DN, KS 230F

CODE: 15-DEU-03

HAY TINE FOR DEUTZ FAHR BALERS - 15-DEU-03 Length - 567mm Weight - 1.080 kg Width - 92mm Orig-part no. - 16502731 Orig-part no. are for reference purposes only

€9.50 (€11.69 inc tax)

In stock

+ −

Feeder Spring

CODE: 143224

Feeder Spring Overall Length - 150mm Length of coil - 96mm Outer Diameter - 20mm Linked parts: 143224, 80143224

€9.50 (€11.69 inc tax)

In stock

+ −

FRANSGARD Hay Tine - Right Model - TI-4000; TI-4000P; TI-6000P

CODE: 15-FRA-06

HAY TINE FOR FRANSGARD 15-FRA-06 Length - 510mm Weight - 1.130 kg Width - 106mm Orig-part no. - 42630 Orig-part no. are for reference purposes only Fits machine type - TI-4000; TI-4000P; TI-6000P

€9.90 (€12.18 inc tax)

In stock

+ −

FRANSGARD Hay Tine - Left Model - TI-4000; TI-4000P; TI-6000P

CODE: 15-FRA-05

HAY TINE FOR FRANSGARD 15-FRA-05 Length - 510mm Weight - 1.130 kg Width - 106mm Orig-part no. - 42629 Orig-part no. are for reference purposes only Fits machine type - TI-4000; TI-4000P; TI-6000P

€9.90 (€12.18 inc tax)

Out of stock

Knotter Knife - Fits - Various Models

CODE: RS6021

€9.94 (€12.23 inc tax)

In stock

+ −

10 Pack of Shearbolts - 8 x 50mm

CODE: MA12447

Shearbolt - pack of 10 8 x 50mm Locknuts included Shearbolts are designed with use for pto and drive shafts. The shearbolt is designed as a weak point in the PTO so that if machine hits something that could potentially damage it, the bolt will shear and disconnect the drive...

€10.00 (€12.30 inc tax)

In stock

+ −

NEW

Concave Wire - PACK OF 10 WIRES

CODE: 80486748

Replacment Concave Wire - PACK OF 10 WIRES 3mm x 640mm wire Linked parts: 80486748, 486748, 80481501, 481501, 80480072, 480072, 80301837, 301837

€10.00 (€12.30 inc tax)

In stock

+ −

Twine Stop Spring - Fits - AP52, AP53, AP530, AP63, AP630, AP730, AP830

CODE: 0940.74.61.00

Twine Stop Spring 0940.74.61.00 Welger For use A Twine Stop Spring used in the Welger AP52, AP53, AP530, AP63, AP630, AP730, AP830 square balers. Linked parts: 0346.17, 0940.74.61.00, 0940746100

€10.50 (€12.92 inc tax)

In stock

+ −

Knotter Knife - 422, 428, 430, 435, 440, 445

CODE: 668962

Knotter Knife 668962 International For use Knotter Knife used in the International square balers. Notes Length: 15mm Width: 9mm Linked parts: 668962, 668962R1

€10.50 (€12.92 inc tax)

In stock

+ −

Round Haydog Rubber complete with Sleeve - Fits - AP Models

CODE: 0938961700

Round Haydog Rubber complete with Sleeve 0938961700 Welger For use A round haydog rubber complete with sleeve used in the chamber area of the Welger AP square balers. Linked parts: 0938961700, 0938.96.17.00

€10.50 (€12.92 inc tax)

In stock

+ −

Shearbolt Bush

CODE: BP14124

SHEARBOLT BUSH Length - 32mm Outer Diameter - 25mm Linked parts: BP14124

€10.50 (€12.92 inc tax)

In stock

+ −

Trip Spring - Markant

CODE: 800445

€10.50 (€12.92 inc tax)

In stock

+ −

Haydog Spring - Fits 120, 124, 128, 220, 224, 228 series square baler

CODE: 584073M1

Haydog Spring

€10.50 (€12.92 inc tax)

In stock

+ −

Haydog Spring - Fits 10/8, 15/8 and 20/8 series square baler

CODE: 642737M1

Haydog Spring

€10.50 (€12.92 inc tax)

In stock

+ −

Small Rubber Handle Kit

CODE: AC6020

Rubber Handle

€11.00 (€13.53 inc tax)

In stock

+ −

Tension Spring for Knotter - 3.2x15x46

CODE: 0940.13.61.00

Tension Spring 3.2x15x46

€11.00 (€13.53 inc tax)

In stock

+ −

FRANSGARD Hay Tine - SR-3200; SR-3200B; SR-3200P; SR-3200T

CODE: 15-FRA-10

HAY TINE FOR FRANSGARD 15-FRA-10 Length - 535mm Weight - 1.150 kg Width - 90mm Orig-part no. - 51218 Orig-part no. are for reference purposes only Fits machine type - SR-3200; SR-3200B; SR-3200P; SR-3200T

€11.10 (€13.65 inc tax)

In stock

+ −

Twine Finger Adjusting Block - Fits - 200, 300, 900 Series

CODE: 00414

Twine Finger Adjusting Block 00414 New Holland For use A steel block used in the twine finger assembly in the New Holland 200, 300 and 900 Series. Linked parts: 00414, 449131, 80449131

€11.50 (€14.15 inc tax)

In stock

+ −

NEW HOLLAND Double Finger

CODE: 98.NH-501

KNIFE FINGER FOR NEW HOLLAND COMBINE - 98.NH-501 Country of origin: Germany For use Total width - 150mm Weight - 0.860 kg Orig-part no. - 379720 Orig-part no. are for refrence purposes only

€11.50 (€14.15 inc tax)

In stock

+ −

Pick Up Bearing - Fits 120, 124, 128

CODE: 832198M1

Rubber Handle

€11.50 (€14.15 inc tax)

In stock

+ −

Boot Flail - 92

CODE: 63-SPH-92

BOOT FLAIL - 63-SPH-92 Country of origin: Germany For use Weight - 0.530 kg Width - 57mm Length - 85mm Orig-part no. - 7190462, 7770723A Orig-part no. are for reference purposes only

€11.86 (€14.59 inc tax)

In stock

+ −

RASSPE Knotter Knife

CODE: RS6059

Knotter Knife RS6059 For use A knotter knife used in various square balers. Notes This is a genuine RASSPE part Linked parts: RS6059

€12.00 (€14.76 inc tax)

In stock

+ −

Mirror Adapter Kit

CODE: vm6KIT

VM6 ADAPTER KIT The VM2 and VM3 in conjunction with the VM6 Adaptor Kit, are suited to Defender owners, as well as having numerous agricultural and construction equipment applications.

€12.00 (€14.76 inc tax)

In stock

+ −

Knotter Bush - AP53, AP530, AP63, AP630, AP73, AP730, AP83, AP830

CODE: 0920.10.83.00

KNOTTER BUSH Fits - AP53, AP530, AP63, AP630, AP73, AP730, AP83, AP830

€12.00 (€14.76 inc tax)

In stock

+ −

Twine Guide

CODE: 0361.08.00.00

Twine Guide 0361.08.00.00 Welger For use A twine guide used in the knotter area of Welger square balers. Notes Height: 12mm Outer Diameter - 20mm Inner Diameter: 11mm Linked parts: 0361080000, 0361.08.00.00, 0361.08, 036108,...

€12.50 (€15.38 inc tax)

In stock

+ −

Diet Feeder Knife - 131

CODE: 70-131

DIET FEEDER KNIFE - 70-131 Length - 170mm Weight - 0.460 kg Thickness - 6mm Orig-part no. - KD1560177 Orig-part no. are for reference purposes only Linked parts: KD1560177

€12.50 (€15.38 inc tax)

In stock

+ −

Medium Rubber Handle Kit

CODE: AC60204

Rubber Handle

€12.50 (€15.38 inc tax)

In stock

+ −

Flywheel Shearbolt - Fits - B46, B47, 430, 440

CODE: 181620

International Flywheel Shearbolt and Locknut - PACK OF 10 Linked parts: 181620, IH181620, 772336R91, 735986R11

€12.50 (€15.38 inc tax)

In stock

+ −

String Guide - Fits - Various Models

CODE: BP13227

String Guide BP13227 John Deere For use A string guide used in various John Deere square balers. Notes Outer Diameter - 37mm Inner Diameter - 12mm Width - 37mm Linked parts: BP13227, 8880214, 88.80.214, 8880200, 88.80.200

€13.10 (€16.11 inc tax)

In stock

+ −

Diet Feeder knives, right - 110

CODE: 70-110

DIET FEEDER KNIFE - 70-110 Length - 195mm Weight - 0.470 kg Orig-part no. - 3000461 Orig-part no. are for reference purposes only Linked parts: 3000461

€13.50 (€16.61 inc tax)

In stock

+ −

10 Pack of Shearbolts - 10 x50mm

CODE: MA12448

Shearbolt - pack of 10 10 x 50mm Locknuts included Shearbolts are designed with use for pto and drive shafts. The shearbolt is designed as a weak point in the PTO so that if machine hits something that could potentially damage it, the bolt will shear and disconnect the drive...

€14.00 (€17.22 inc tax)

In stock

+ −

Bushing

CODE: 0920.12.37.00

Bushing Length - 35mm Outer Ø - 25mm Inner Ø - 20mm NUMBER 4 ON DIAGRAM

€14.00 (€17.22 inc tax)

In stock

+ −

Knurl / Roller - AP41, 42, 45, 51, 52, 53, 61, 63, 71, 73, 430, 530, 630, 730, 830

CODE: 0362.09.00.00

KNURL / ROLLER 0362.09 WELGER For use A roller in the trip arm which is used to determine the length of the bale. Linked parts: 0362.09, 036209, 0362.09.00, 03620900, 0362.21, 036221

€14.50 (€17.84 inc tax)

In stock

+ −

Leaf spring - 140mm

CODE: 101.01256

LEAFSPRING - 101.01256 Country of origin: Germany NOTES Weight - 0.465kg Orig-part no. - 057067 Orig-part no. are for reference purposes only

€14.50 (€17.84 inc tax)

In stock

+ −

LAVERDA Double Finger

CODE: 98.LAV-501

KNIFE FINGER FOR JOHN DEERE COMBINE - 98.LAV-501 Country of origin: Germany For use Total width - 105mm Weight - 0.660 kg Orig-part no. - 1896130 Orig-part no. are for refrence purposes only

€14.50 (€17.84 inc tax)

In stock

+ −

LEFT Topper Blade - 320 length x 30mm hole

CODE: ADI3207530L

TOPPER BLADE - LEFT Length - 320mm Width - 75mm Hole Size - 30mm Thickness - 7mm

€14.50 (€17.84 inc tax)

In stock

+ −

RIGHT Topper Blade - 320 length x 30mm hole

CODE: ADI3207530R

TOPPER BLADE - RIGHT Length - 320mm Width - 75mm Hole Size - 30mm Thickness - 7mm

€14.50 (€17.84 inc tax)

In stock

+ −

Hammer Flail - 801

CODE: 63-RM-801

HAMMER FLAIL- 63-RM-801 Country of origin: Germany For use Weight - 0.580 kg Width - 55mm Orig-part no. - MT/3507 Orig-part no. are for reference purposes only

€14.63 (€17.99 inc tax)

In stock

+ −

Blade Holder for PZ-ZWEEGERS Mower

CODE: 80-2012

BLADE HOLDER FOR PZ-ZWEEGERS MOWER - 80-2012 Country of origin: Germany For use Length - 210mm Weight - 0.700 kg Thickness - 4 mm Orig-part no. - PZ-0243 Orig-part no. are for refrence purposes only Fits machine type - CM 210 (75), CM 211, CM 211 F (80), CM...

€14.86 (€18.28 inc tax)

In stock

+ −

Slasher Blade - 320mm

CODE: 17393

TOPPER BLADE - SLASHER / SHREDDER BLADE Length - 320mm Width - 75mm (at widest part) Hole - 30mm Thickness - 7mm

€15.00 (€18.45 inc tax)

In stock

+ −

Flywheel Shearbolt - Fits - 65E / 68 / S68 / 78 / S78/ S268 / 274 / 276 / 278/ 286

CODE: 39716-3600

New Holland Flywheel Shearbolt and lock nut - PACK OF 10 Fits models - 65E / 68 / S68 / 78 / S78/ S268 / 274 / 276 / 278/ 286

€15.00 (€18.45 inc tax)

In stock

+ −

Flywheel Shearbolt - Fits 376

CODE: 544502-3604

New Holland Flywheel Shearbolt and lock nut - PACK OF 10 Fits models - 376

€15.00 (€18.45 inc tax)

In stock

+ −

Flywheel Shearbolt - Fits - 386, 387

CODE: 554935-11855

New Holland Flywheel Shearbolt and lock nut - PACK OF 10 Fits models - 386 / 387

€15.00 (€18.45 inc tax)

In stock

+ −

Knotter Shearbolt - 370 / 376 / 377 / 378 /386 / 387 / 940 / 945

CODE: 46520-3607

New Holland Knotter Shearbolt and lock nut - PACK OF 10 Fits models - 370 / 376 / 377 / 378 /386 / 387 / 940 / 945

€15.00 (€18.45 inc tax)

In stock

+ −

ONLY AT MDAGRISPARES

LED Pole Mounted Beacon

CODE: 0061

LED Pole Mount Rotating Beacon - SET OF 2

€15.00 (€18.45 inc tax)

Out of stock

Massey Ferguson Flywheel Shearbolt - 15, 20

CODE: 781842M1-3611

Flywheel Shearbolt - PACK OF 10 Fits - 15, 20 series balers

€15.00 (€18.45 inc tax)

In stock

+ −

Feeder Drive Shearbolt - 274, 276, 278, 286

CODE: 46047-3601

New Holland Feeder Drive Shearbolt and lock nut - PACK OF 10 Fits models - 274, 276, 278, 286

€15.00 (€18.45 inc tax)

In stock

+ −

Knotter Shearbolt - 278

CODE: 51430-3607

New Holland Knotter Shearbolt and lock nut - PACK OF 10 Fits models - 278

€15.00 (€18.45 inc tax)

In stock

+ −

Twine Retainer Spring - Fits - 430, 440

CODE: 662112R1

Twine Retainer Spring 662112R1 International Linked parts: 662112R1, 3101296R1

€15.15 (€18.63 inc tax)

In stock

+ −

Knotter Brake

CODE: E47763

John Deere Knotter Brake

€15.50 (€19.07 inc tax)

Out of stock

LEFT Topper Blade - 320 length x 26mm hole

CODE: ADI3207526L

TOPPER BLADE - LEFT Length - 320mm Width - 75mm Hole Size - 26mm Thickness - 7mm

€15.50 (€19.07 inc tax)

In stock

+ −