Bestsellers - Mc Daid Agri Spares

Knotter

CODE: 1120.72.08.01

Complete Knotter Linked parts: 1120.72.08.01, 1120720801

$769.23 ($946.15 inc tax)

In stock

+ −

SPACER

CODE: 0910.90.12.00

Spacer Linked parts: 0910.90.12.00, 0910901200

$3.52 ($4.33 inc tax)

In stock

+ −

Aluminium Support - AP38-AP530 - 1109.22.11.03

CODE: 1109.22.11.03

Aluminium Support Linked parts: 1109.22.11.03, 1109221103, 0762.58, 076258

$126.37 ($155.44 inc tax)

In stock

+ −

Welger Sprocket - 0720010000

CODE: 0720.01.00.00

Sprocket Linked parts: 0720.01.00.00, 0720010000

$49.45 ($60.82 inc tax)

In stock

+ −

Welger Regulator Screw - 1105221106

CODE: 1105221106

Welger Regulator Screw Linked parts: 1105221106, 1105.22.11.06

$38.46 ($47.31 inc tax)

In stock

+ −

Pinion and pinion gear - AP52, AP53, AP400, AP430, AP500, AP530

CODE: 0707.13.00.00

Pinion and pinion gear - Welger FITS - AP52, AP53, AP400, AP430, AP500, AP530 Linked parts: 0307.70.00.00, 0307700000, 0707.13.00.00, 0707130000

$659.34 ($810.99 inc tax)

In stock

+ −

Pick Up Tine - Fits - 120, 124, 128

CODE: 585136M1

Pick Up Tine 585136M1 Massey Ferguson For use A pick up tine used in the Massey 120, 124, 128 square balers. Linked parts: 585136M1

$2.75 ($3.38 inc tax)

In stock

+ −

Pick Up Tine - Fits - 10/8, 15/8, 20/8

CODE: 781943m1

Pick Up Tine 781943m1 Massey Ferguson For use A pick up tine used in the Massey 10/8, 15/8, 20/8 square balers. Linked parts: 781943m1, 152212M1

$2.75 ($3.38 inc tax)

In stock

+ −

Welger Wire Rope / Cable

CODE: 0936.18.65.00

Wire Rope / Cable NUMBER 13 IN DIAGRAM

$46.15 ($56.77 inc tax)

Out of stock

Bushing

CODE: 0920.12.37.00

Bushing Length - 35mm Outer Ø - 25mm Inner Ø - 20mm NUMBER 4 ON DIAGRAM

$15.38 ($18.92 inc tax)

In stock

+ −

Spring

CODE: 0940.63.84.00

Spring NUMBER 7 ON DIAGRAM

$26.37 ($32.44 inc tax)

In stock

+ −

Spring

CODE: 0940.63.71.00

Spring NUMBER 6 ON DIAGRAM

$39.56 ($48.66 inc tax)

In stock

+ −

Tension Spring for Knotter - 3.2x15x46

CODE: 0940.13.61.00

Tension Spring 3.2x15x46

$12.09 ($14.87 inc tax)

In stock

+ −

Twine Tensioner

CODE: 1116.22.14.00

Twine Tensioner Fits AP42, 48, 52, 53 series balers

$43.96 ($54.07 inc tax)

In stock

+ −

Keyway - 6x6x40

CODE: 0913.50.34.00

Keyway 6x6x40

$8.79 ($10.81 inc tax)

In stock

+ −

Pawl Lever

CODE: 1124.22.11.46

Pawl Lever 1124.22.11.46 Welger

$395.60 ($486.59 inc tax)

In stock

+ −

Knotter Bush - AP53, AP530, AP63, AP630, AP73, AP730, AP83, AP830

CODE: 0920.10.83.00

KNOTTER BUSH Fits - AP53, AP530, AP63, AP630, AP73, AP730, AP83, AP830

$13.19 ($16.22 inc tax)

In stock

+ −

Bush - Markant Models

CODE: 818049

Bush 818049 Claas Fits - Markant series balers Notes Outer Ø- 27.5mm Inner Ø - 24.9mm Linked parts: 818049, 818049.0, 008180491

$17.03 ($20.96 inc tax)

In stock

+ −

Tension Spring - AP12, 40, 41, 45, 52, 51, 61, 71

CODE: 0940127000

A spring used in the Welger AP61, AP63 and AP71 square balers.

$3.30 ($4.05 inc tax)

In stock

+ −

Welger RP202 Pick Up Band

CODE: 1721.42.05.01

$24.73 ($30.42 inc tax)

In stock

+ −

Needle Roller - AP

CODE: 0326020000

Welger Baler Needle Roller Linked parts: 0326.02.00.00, 59,101, 0326020000, 00001941.0, BP13365

$6.04 ($7.44 inc tax)

In stock

+ −

Plunger Bush - Markant

CODE: 008568

$4.95 ($6.09 inc tax)

In stock

+ −

Welger Shearbolt - AP45, AP61, AP71, AP12 - PACK OF 10

CODE: W3625

Welger Flywheel and Packer Shearbolt - AP45, AP61, AP71, AP12 - PACK OF 10

$27.47 ($33.79 inc tax)

In stock

+ −

Knotter Shearbolt - 278

CODE: 51430-3607

New Holland Knotter Shearbolt and lock nut - PACK OF 10 Fits models - 278

$16.48 ($20.27 inc tax)

In stock

+ −

Feeder Drive Shearbolt - 274, 276, 278, 286

CODE: 46047-3601

New Holland Feeder Drive Shearbolt and lock nut - PACK OF 10 Fits models - 274, 276, 278, 286

$16.48 ($20.27 inc tax)

In stock

+ −

Massey Ferguson Flywheel Shearbolt - 15, 20

CODE: 781842M1-3611

Flywheel Shearbolt - PACK OF 10 Fits - 15, 20 series balers

$16.48 ($20.27 inc tax)

In stock

+ −

Shearbolt Bush

CODE: 583038

SHEARBOLT BUSH Fits - 124 series

$36.81 ($45.29 inc tax)

In stock

+ −

Bomford Boot Flail KIT

CODE: 63-RM-17KIT

BOOT FLAIL - 63-M-17KIT KIT COMPRISES OF - 1 Boot Flail 1 Shackle 2 Internal Bush 1 Internal Bush 1 X 10mm Bolt and Nut Orig-part no. - 02.959.01, 7190463, 100113, 7770728SP, 140-810, 13800 Orig-part no. are for reference purposes only

$17.03 ($20.96 inc tax)

In stock

+ −

Haydog Spring

CODE: 7009335

Haydog Spring Linked parts: 7009335

$18.13 ($22.31 inc tax)

In stock

+ −

Flywheel Shearbolt - Fits - B46, B47, 430, 440

CODE: 181620

International Flywheel Shearbolt and Locknut - PACK OF 10 Linked parts: 181620, IH181620, 772336R91, 735986R11

$13.74 ($16.90 inc tax)

In stock

+ −

Clutch Spring - Fits 120, 124, 128, 220, 224, 228

CODE: 584048M1

Rubber Handle

$6.59 ($8.11 inc tax)

In stock

+ −

New Holland Pick Up Drive Chain - Primary Chain - 370

CODE: 536436

New Holland Pick Up Drive Chain - Primary / Long Chain Comes with 1 Jointing Link FITS - 370 series baler Linked parts: 536436

$46.15 ($56.77 inc tax)

In stock

+ −

Pick Up Bearing - Fits 120, 124, 128

CODE: 832198M1

Rubber Handle

$12.64 ($15.55 inc tax)

In stock

+ −

Knurl - Fits 124, 128, 220, 224

CODE: 918412

Rubber Handle

$22.53 ($27.71 inc tax)

In stock

+ −

Pick Up Tine

CODE: LS50007

Pick Up Tine Length - 190mm Width - 77mm Outer Ø of coil - 40mm Inner Ø of coil - 30mm Linked parts: RS7748, BL 59MAF, LS50007, BS7748, 59542, 59.542

$5.33 ($6.56 inc tax)

In stock

+ −

Plunger Knife - 58, 59, 159

CODE: BS7309

Plunger Knife The Moving knife used in the plunger of the Bamford 58, 59 and 159 series square balers. Length - 336mm Width of knife at widest part - 115mm Linked parts: BS7309

$104.40 ($128.41 inc tax)

In stock

+ −

Twine Disc - Fits - 120, 124, 128, 220, 224, 228

CODE: 918008M91

Twine Disc 918008M91 Massey Ferguson A twine disc used in the knotter area of the Massey Ferguson 120, 124, 128, 220, 224 and 228 square balers. Linked parts: 918012M1, 918008M91, 918027M2

$241.76 ($297.36 inc tax)

In stock

+ −

Complete Twine Tension Assembly

CODE: 584287M1

Twine Tension Assembly Fits - 120, 124, 128, 220, 224 and 228 series square baler Linked parts: 584287M1, 584287

$40.11 ($49.34 inc tax)

In stock

+ −

Plunger Bearing Bolt

CODE: 583949M3

Plunger Bearing Bolt Fits - 120, 124, 128, 220, 224 and 228 series square baler Length - 86mm Linked parts: 583949M3, 583949

$40.11 ($49.34 inc tax)

In stock

+ −

Haydog Spring - Fits 10/8, 15/8 and 20/8 series square baler

CODE: 642737M1

Haydog Spring

$11.54 ($14.20 inc tax)

In stock

+ −

Haydog Spring - Fits 120, 124, 128, 220, 224, 228 series square baler

CODE: 584073M1

Haydog Spring

$11.54 ($14.20 inc tax)

In stock

+ −

Feeder Connector - Fits - 376, 377, 378, 386, 940 and 945 series

CODE: 535582

Feeder Connector 535582 New Holland A feeder connector used in the New Holland 376, 377, 378, 386, 940 and 945series square balers. Linked parts: 80535582, 535582, 535590, 80535590

$175.82 ($216.26 inc tax)

In stock

+ −

Plunger Knife

CODE: 538540

Plunger Knife The moving plunger knife used in the Jones MK10 and MK12 series square balers. Length - 335mm Width - 115mm Distance between mounting holes - 110mm and 135mm Number of Mounting holes - 3

$93.96 ($115.57 inc tax)

In stock

+ −

Pick Up Cam - Fits - 276, 376 and 377 series balers

CODE: 158514

PICK UP CAM 158514 NEW HOLLAND A pick up cam used in the New Holland 276, 376, 377 series balers. Linked parts: 158514, 80158514

$302.20 ($371.70 inc tax)

In stock

+ −

Plunger Stop Spring

CODE: 655919R1

International Plunger Stop Spring Fits - 430, 440 series balers Linked parts: 655919R1, 655919R, IH655919R1

$19.23 ($23.66 inc tax)

In stock

+ −

Haydog

CODE: 662007R2

International Haydog Fits - 430, 435, 440, 445, B46 and B47 series balers Linked parts: 662007, IH662007, 662007R2

$43.41 ($53.40 inc tax)

Out of stock

Feeder Finger Spring

CODE: 662632R1

International Feeder Finger Spring Fits - 430, 435, 440, 445 series balers Linked parts: 662632r, 662632r1

$20.33 ($25.01 inc tax)

In stock

+ −

Tension Spring - AP45, AP61, AP71

CODE: 1115040112

Tension spring for the chamber - Fits AP45, AP61, AP71 series baler NOTE - THIS SPRING SCREWS IN AT THE BOTTOM Linked parts: 1105.04.01.12, 1105040112, 1115.04.01.18, 1115040118

$120.88 ($148.68 inc tax)

In stock

+ −

Needle Brake - AP41 AP45 AP52 AP53 AP61 AP530 series baler

CODE: 1105291000

Needle Brake - AP 41 AP 45 AP 52 AP 53 AP 61 AP 530 series baler Linked parts: 1105.29.10.00, 1105291000

$120.88 ($148.68 inc tax)

In stock

+ −

Welger Flywheel / Packer Shearbolt - AP61, AP52, AP53, AP63, RP150, RP180 - PACK OF 10

CODE: W0901105001-11104

Welger Flywheel / Packer Shearbolt - PACK OF 10 Linked parts: 0901.10.50.01, 0901105001

$32.97 ($40.55 inc tax)

In stock

+ −

Pick Up Tine - AP630 and RP Models

CODE: 0940.52.25.00

Pick Up Tine AP630 and RP Models A pick up tine used in the Welger AP630 and RP series square balers. Notes Length - 190mm Width - 68mm Outer Ø of coil - 40mm Thickness - 5mm Linked parts: 0940522500, 0940522900, 0940.52.25.00, 0940.52.29.00, 0940.52.70.00,...

$2.75 ($3.38 inc tax)

In stock

+ −

Bale Counter Clock

CODE: 622A

Bale Counter Clock Comes complete with spring

$28.02 ($34.47 inc tax)

In stock

+ −

Trip Spring - Markant

CODE: 800445

$11.54 ($14.20 inc tax)

In stock

+ −

Trip Spring - Markant

CODE: 002136

$9.89 ($12.16 inc tax)

In stock

+ −

Clutch Disc Markant 41, 51, 55, 65

CODE: 808202

Clutch Disc for Markant 41, 51, 55, 65 series square balers Outer Ø - 165 mm Inner Ø - 75mm Thickness - 6mm. Linked parts: 808202, 0008082023, 00808202, 808202.3, 8082023

$28.02 ($34.47 inc tax)

In stock

+ −

Joiner Hose - 6"

CODE: 8843

Straight hose joiner for assembling two hoses together using suitable bolt type hose clips Finish: galvanised 6"

$17.87 ($21.98 inc tax)

Out of stock

Plunger Bush - Fits - 120, 124, 128, 220, 224, 228

CODE: 831103M1

Plunger Bush 831103M1 Massey Ferguson A bush used in the plunger in the Massey Ferguson 120, 124, 128, 220, 224 and 228 series square balers. Height - 52mm Outer Ø - 37mm Inner Ø - 32mm Linked parts: 831103m, 831103m1

$34.62 ($42.58 inc tax)

In stock

+ −

Gear - Fits - 120, 124, 128, 220, 224, 228

CODE: 918012M91

Gear 918012M1 Massey Ferguson A gear used in the knotter area of the Massey Ferguson 120, 124, 128, 220, 224 and 228 series square balers. Notes Number of teeth - 9 Height - 7mm Inner Diameter - 4.5mm Linked parts: 918012M91, 918012M1, 918012M

$24.73 ($30.42 inc tax)

In stock

+ −

Knotter Gear - Fits - 120, 124, 128, 220, 224, 228

CODE: 918027m91

Knotter Gear 918027M2 Massey Ferguson A gear used in the knotter area of the Massey Ferguson 120, 124, 128, 220, 224 and 228 series square balers. Notes Number of teeth - 18 Inner Diameter - 15mm Linked parts: 150927M6

$32.42 ($39.88 inc tax)

In stock

+ −

Knotter Spring - 430, 435, 440, 445

CODE: 201637C1

Knotter Spring Overall Length - 185mm Width at widest part - 25mm Fits - 430, 435, 440, 445 series balers Linked parts: 201637c1, 201642c1

$26.92 ($33.12 inc tax)

In stock

+ −

Knurl

CODE: 3100851

Knurl Fits - B47, 430, 440 Linked parts: 3100851, 3100851R1

$20.33 ($25.01 inc tax)

In stock

+ −

Retainer Bilhook Cam Spring

CODE: 131DA

International Retainer Bilhook Cam Spring Length - 39mm External Ø - 12mm Fits - 430, 440 series balers Linked parts: U13033, 13033

$9.34 ($11.49 inc tax)

In stock

+ −

Clutch Disc - Fits - 332, 336, 342, 346

CODE: AE23860

CLUTCH DISC Inner Ø - 31mm Outer Ø - 200 Number of Splines - 21 Thickness - 6mm Height - 34mm Fits - 332, 336, 342, 346, John Deere Mower - 1320, 1326, 1327 Linked parts: AE23860, DC17783

$46.70 ($57.45 inc tax)

In stock

+ −

Tine Holder - AP12, AP41, RP235, RP245

CODE: 03383000

TINE HOLDER Fits - AP and RP models Linked parts: 0338.30.00.00.01, 033830000001, 0338300001, 0338.30.00.01

$6.04 ($7.44 inc tax)

In stock

+ −

Knotter Cam Wheel

CODE: 3100001R1

KNOTTER CAM WHEEL Fits - 422, 428, 430, 435, 440, 445 series baler Linked parts: 3100001R1, 667819R1, 668791R2

$98.35

In stock

+ −

Bilhook Cam Spring

CODE: U13033

INTERNATIONAL BILHOOK CAM SPRING Length - 37mm Outer Ø - 17mm Fits - 430, 435, 440, 445 Linked parts: U13033, 13033

$9.34 ($11.49 inc tax)

In stock

+ −

Knotter Crown Wheel - 440 series

CODE: 662037R1

KNOTTER CROWN WHEEL Number of Mounting Holes - 3 Fits - 440 series Baler Linked parts: 662037R1, 662037

$121.43 ($149.36 inc tax)

In stock

+ −

RASSPE Billhook - 118mm

CODE: RS3765K

RASSPE Bilhook A bilhook used in the knotter section of the International square balers. Length - 118mm GENUINE RASSPE PART Linked parts: RS3765, RS3765K

$137.91 ($169.64 inc tax)

Out of stock

Pick Up / Cam Follower Arm

CODE: DC18667

PICK UP / CAM FOLLOWER ARM Fits - 219, 221, 332, 339, 342, 346, 349, 359, 459, 456, 466, 224, 336, 327, 328, 337, 338, 347, 467, 468 series balers Linked parts: DC18667, 18667

$46.70 ($57.45 inc tax)

In stock

+ −

Bush

CODE: E45511

BUSH NUMBER 10 ON DIAGRAM FITS - 332, 336, 342, 346, 359, 459 series balers Linked parts: E45511, 45511

$28.02 ($34.47 inc tax)

In stock

+ −

Knotter Brake Disc

CODE: AE23994

KNOTTER BRAKE DISC Number 15 on diagram Fits - 327, 332, 336, 337, 339, 342, 346, 349, 359, 459, Linked parts: AE23994, 23994

$53.30 ($65.56 inc tax)

In stock

+ −

Knotter Gear - Fits - 422, 428, 430, 435, 440, B46, B47

CODE: 495192R1

Knotter Gear 495192R1 International For use A gear used in the knotter area of the International square balers. Number of Teeth - 6 Number of Mounting Holes - 1 Linked parts: 495192R1, 495192R

$40.11 ($49.34 inc tax)

In stock

+ −

FLYWHEEL BUSH

CODE: BP14006

JOHN DEERE FLYWHEEL BUSH Height - 49mm Outer Diameter - 70mm Linked parts: BP14006

$21.43 ($26.36 inc tax)

In stock

+ −

Shearbolt Bush

CODE: BP14124

SHEARBOLT BUSH Length - 32mm Outer Diameter - 25mm Linked parts: BP14124

$11.54 ($14.20 inc tax)

In stock

+ −

Topper Bush - Ø30 x Ø20mm

CODE: 208G

TOPPER BUSHING Outer Ø - 30mm Inner Ø - 20mm Height - 25mm Linked parts: topper, major, bush

$4.95 ($6.09 inc tax)

In stock

+ −

Pick Up Band - Fits - 120, 124, 128

CODE: 584759M2

PICK UP BAND 584759M2 MASSEY FERGUSON For use A pick up band used in the Massey 120, 124, 128 square balers. Linked parts: 584759M2, 594759M2

$30.22 ($37.18 inc tax)

In stock

+ −

HAYDOG - Fits 200, 300, 900 series

CODE: 167165

HAYDOG 167165 NEW HOLLAND A haydog used in the Chamber area of the New Holland 200, 300 and 900 square balers. Linked parts: 167165, 80167165, 132415, 80132415

$50.00 ($61.51 inc tax)

In stock

+ −

Plunger Bearing - 370, 376, 377, 378 series

CODE: 80535664

Plunger Bearing Outer Diameter - 63.5mm Width - 22.5mm Length - 57mm Thread - M20 x 1.5 Fits - 370, 376, 377, 378 series balers OEM - 450310, 535664, 700051671, 80450310, 861325, 80535664 Linked parts: 80535664, 535664, 450310, 80450310, 861325, 700051671

$50.00 ($61.51 inc tax)

In stock

+ −

Main Plunger Bearing – 3/4" UNF

CODE: AE30220F535659g

Main Plunger Bearing - 3/4" UNF Thread For use A plunger bearing used in various square balers. Length -57mm Diameter - 63.5mm Notes This bearing also fits Massey Ferguson, John Deere and New Holland Balers. Linked parts: JD58101, 622426M3,...

$53.30 ($65.56 inc tax)

In stock

+ −

Plunger Bearing

CODE: BS6210

Bamford Plunger Bearing Length - 66mm Width - 63.5mm Thread - 5/8" (15.9) Thickness - 23mm Linked parts: BS6210, 58117, 58.117

$86.26 ($106.11 inc tax)

In stock

+ −

Feeder Spring

CODE: 143224

Feeder Spring Overall Length - 150mm Length of coil - 96mm Outer Diameter - 20mm Linked parts: 143224, 80143224

$10.44 ($12.85 inc tax)

In stock

+ −

Tension Spring

CODE: 0940.29.97

Tension Spring Length of spring - 143mm Length of coil - 100mm Outer Diameter - 31mm Linked parts: 0940.29.97, 09402997, 0940299700

$26.92 ($33.12 inc tax)

In stock

+ −

Terror Hawk Kite

CODE: ASH00350

Terror Hawk Kite Realistic Flying Bird Decoy Garden Bird Scarer. Extremely realistic, highly detailed Hawk decoy. Terror Hawk Kite - 1180mm x 650mm

$17.87 ($21.98 inc tax)

In stock

+ −

John Deere Knotter Drive

CODE: AE32870

John Deere Knotter Drive Gear Outer Diameter - 265mm Inner Diameter - 28mm Number of Teeth - 35 Height - 56mm Fits - 332, 336, 339, 342, 349, 456, 459, 466 Linked parts: DC210288, AE32870

$181.32 ($223.02 inc tax)

In stock

+ −

Twine Finger Spring – Fits –330, 332, 336, 339, 342, 346, 456, 466, 540, 545, 550

CODE: B27616/61128

Twine Finger Spring Overall Length - 99mm Length of Coil - 66mm Outer Diameter - 22mm Inner Diameter - 17mm Fits –330, 332, 336, 339, 342, 346, 456, 466, 540, 545, 550 Linked parts: B27616, 61128

$7.47 ($9.19 inc tax)

In stock

+ −

NEW

Concave Wire - PACK OF 10 WIRES

CODE: 80486748

Replacment Concave Wire - PACK OF 10 WIRES 3mm x 640mm wire Linked parts: 80486748, 486748, 80481501, 481501, 80480072, 480072, 80301837, 301837

$10.99 ($13.52 inc tax)

In stock

+ −

Knife Section - Box of 25

CODE: 80365110

Linked parts: 365110, 80365110

$43.96 ($54.07 inc tax)

In stock

+ −

NEW

Bilhook Tongue - Fits Markant Models

CODE: 000048

BILHOOK TONGUE 000048 CLAAS A replacement part also known as a tongue / beak used in the bilhook unit of the Claas Markant square balers. Linked parts: 000048, 000048.0

$44.51 ($54.75 inc tax)

In stock

+ −

Knife Head

CODE: 67012

Knife Head Length - 172mm Height - 62mm Shaft Width - 36mm Distance between Mounting Holes - 70mm Fits - Commandor 112CS, 114CS, 115CS, 116CS, 228CS, Dominator, Mega Models Linked parts: 67012, 006701201, 670120, 0006701201, 100144.0, 0001001440, 100144, 42623

$43.41 ($53.40 inc tax)

In stock

+ −

Ball Joint

CODE: 670098

Ball Joint Length - 120mm Thread - 22 x 1,5 Length of screw thread - 65mm Width - 94mm Fits - Dominator 100, 105, 106, 68, 76, 80, 85, 86, 96 Linked parts: 670098, 670098.0, 000670098, 0006700980

$39.01 ($47.99 inc tax)

In stock

+ −

BOGBALLE VANES - 20-24MT

CODE: BV02

SET OF 4 VANES FOR BOGBALLE FERTILISER SPREADER FITS - L2, M2M M3, M6, EX, EXW Models

$329.67 ($405.49 inc tax)

Out of stock

BOGBALLE VANES - 12-18MT

CODE: BV01

SET OF 4 VANES FOR BOGBALLE FERTILISER SPREADER FITS - L2, M2M M3, M6, EX, EXW, DZ Models

$318.68 ($391.98 inc tax)

Out of stock

NEW

Bearing with Flange Housing - AP38, AP48, AP400, AP500, AP530. AP42, AP542, AP430, AP53

CODE: 0924203000

Bearing with Flange Housing 0924203000 Welger Internal Diameter of Bearing - 30mm Length of Housing - 113mm Distance between Mounting Holes - 90.5mm Mounting Holes - 11mm Linked parts: 0924203000, 0924.20.30.00, 02390110, 0002390110, 239011.0

$60.44 ($74.34 inc tax)

In stock

+ −

NEW

Bale Counter Clock

CODE: 0995100100

Bale Counter Clock 0995100100 Welger Comes complete with spring Linked parts: 0995100100, 0995.10.01.00

$53.30 ($65.56 inc tax)

In stock

+ −

Pick Up Cam Centre Shaft Bearing

CODE: 0922129100

Pick Up Cam Centre Shaft Bearing 0922129100 Welger Internal Diameter - 30mm Outer Diameter - 62mm Depth - 16mm Linked parts: 0922129100, 0922.12.91.00

$40.11 ($49.34 inc tax)

In stock

+ −

NEW SEASON ONLY AT MDAGRISPARES

5L Hoof Proof Bucket - PACK OF 2

CODE: HP5L

Virtually indestructible range of buckets. They can withstand kicks and stomping. You can easily push these back into shape. Extremely durable.

$8.93 ($10.99 inc tax)

In stock

+ −

NEW SEASON ONLY AT MDAGRISPARES

15L Hoof Proof Bucket - PACK OF 2

CODE: HP15L

Virtually indestructible range of buckets. They can withstand kicks and stomping. You can easily push these back into shape. Extremely durable.

$17.87 ($21.98 inc tax)

In stock

+ −

Diet Feeder Knife - SET OF 8 WITH BOLTS

CODE: 70-335SET

SET OF 8 STANDARD KNIVES COMPLETE WITH 24 M16 x 55mm COUNTERSUNK ALLEN KEY HEAD BOLTS & NUTS

$393.10 ($483.52 inc tax)

In stock

+ −

FREE SHIPPING

Set of 18 KNIVES AND 36 BOLTS

CODE: 70-303304KIT

SET OF 18 KNIVES COMPLETE WITH 36 BOLTS & NUTS PLEASE SPECIFY IN THE NOTES SECTION IF YOU REQUIRE 9 LEFT AND 9 RIGHT BLADES OR 18 OF THE SAME BLADE Linked parts: 703957

$375.23 ($461.54 inc tax)

In stock

+ −

ONLY AT MDAGRISPARES

Vidbag - FREE SHIPPING

CODE: VB1

Vidbag Big Bag Dispenser Using the Vidbag it is possible to empty a big bag partially. It can be used with seeds, fertiliser, gravel or any other free flowing material and can be emptied in a controlled manner, quickly and easily without leaking or spilling. This product is...

$142.95 ($175.82 inc tax)

In stock

+ −

Flywheel Clutch Spring - Fits - 200 series

CODE: 28284

Flywheel Clutch Spring 28284 New Holland Notes Length - 45mm Outer Diameter - 20mm Linked parts: 28284, 80028284

$4.18 ($5.13 inc tax)

In stock

+ −

Flywheel Clutch Spring - Fits - 370

CODE: 126758

Flywheel Clutch Spring 126758 New Holland Notes Length - 58mm Outer Diameter - 26mm Linked parts: 126758, 80126758

$4.95 ($6.09 inc tax)

In stock

+ −

Feeder Connector Pins

CODE: 602220

Feeder Connector Pins New Holland Overall Length - 50mm Thickness - 7mm Linked parts: 80215720, 215720, 80602220, 602220

$18.13 ($22.31 inc tax)

In stock

+ −

Knurl / Roller - 500, 940 series

CODE: 507KNURLCH

KNURL / ROLLER NEW HOLLAND For use A roller in the trip arm which is used to determine the length of the bale. FITS - 500 and 940 series balers Linked parts: 41521, 80041521, 60614, 1111, 041521

$21.43 ($26.36 inc tax)

In stock

+ −

Gear Wheel

CODE: 808112

$131.87 ($162.20 inc tax)

In stock

+ −

Spring

CODE: 61137

Spring For use A spring used in the New Holland square balers. Notes Overall Length - 90mm Coil Length - 56mm Linked parts: 61137, 61.137

$7.14 ($8.79 inc tax)

In stock

+ −

Twine Finger Assembly - Fits - 200, 300 series

CODE: 185139CU

Twine Finger Assembly 185139CU New Holland For use A twine finger complete assembly used in the New Holland 200 and 300 series square balers. Notes Colour may vary Linked parts: 185139, 185139CU

$79.67 ($98.00 inc tax)

In stock

+ −

Adjusting Rod

CODE: AM52354

Adjusting Rod AM52354 John Deere For use An adjusting rod used in the knotter section of the John Deere square balers. Linked parts: AS20116, E57313, AM52354

$26.92 ($33.12 inc tax)

In stock

+ −

Twine Guide Spring

CODE: 1110221605

SPRING TENSIONER / TWINE GUIDE SPRING 1110.22.16.05 WELGER For use A spring used to tension the twine in the knotter area of the Welger square balers. Notes Length - 520mm Wire Diameter - 5mm Linked parts: 1110.22.16.08, 1110221608, 0940.52.96.00, 0940529600

$17.58 ($21.63 inc tax)

In stock

+ −

Baler Needle - To fit machine - 370, 376, 377, 378, 940, 945

CODE: 80535624

New Holland Baler needle (Steel) 80535624 For use A steel baler needle used in the New Holland 370, 376, 377, 378, 940, 945 square balers. Linked parts: 535624, 80535624

$120.88 ($148.68 inc tax)

In stock

+ −

Baler Needle - To fit machine - ER45, RC46

CODE: 25257011

Rivierre Casalis Baler needle (Steel) 25257011 Linked parts: 25257011, 87124

$142.86 ($175.71 inc tax)

In stock

+ −

Haydog - 120, 124, 128, 220, 224, 228

CODE: 584074M3

Haydog 584074M3 Massey Ferguson For use A haydog used in the Chamber area of the Massey Ferguson 120, 124, 128, 220, 224, 228 square balers. Linked parts: 584074M3, 584074, 584070

$46.15 ($56.77 inc tax)

In stock

+ −

Knotter Knife - AP530, AP630, AP730, AP830

CODE: 0982.10.03.00

Knotter Knife 0982.10.03.00 Welger A knife used in the knotter area of the Welger AP530, AP630, AP730, AP830 series square balers. Linked parts: 0982.10.03.00, 0982100300

$8.24 ($10.14 inc tax)

In stock

+ −

Knotter Knife - AP12, AP12K, AP40, AP41, AP42, AP45, AP51, AP52, AP61, AP71

CODE: 03640300

Knotter Knife 0364.03.00 Welger For use A knife used in the knotter area of the Welger AP12, AP12K, AP40, AP41, AP42, AP45, AP51, AP52, AP61, AP71 square balers. Linked parts: 0364030000, 0364.03.00.00, 0364.03, 036403

$9.34 ($11.49 inc tax)

In stock

+ −

Conrod Bearing - 376, 377, 378

CODE: 563636CU

Conrod Bearing 563636 New Holland For use A housing complete with bearing used in the plunger section of the New Holland 376, 377 and 378 square balers. Linked parts: 563636, 80563636

$159.34 ($195.99 inc tax)

In stock

+ −

Bilhook – AP Models

CODE: 12402303

Bilhook 1240.23.03 Welger For use A replacement part used in the knotter area of the Welger AP square balers. Linked parts: 1240230300, 1240.23.03, 1246.23.06.05, 1246230605, 12402303, 1240.23.03.01, 1240230305, 1240.23.03.05, 1101.23.02.05, 1101.23.02.01, 1240230301

$120.88 ($148.68 inc tax)

In stock

+ −

Conrod Bearing - 276, 268, 370

CODE: 45570CU

Conrod Bearing 45570 New Holland For use A housing complete with bearing used in the plunger section of the New Holland 276, 268 and 370 square balers. Linked parts: 8045570, 45570

$137.36 ($168.96 inc tax)

In stock

+ −

RIGHT Topper Blade - 320 length x 30mm hole

CODE: ADI3207530R

TOPPER BLADE - RIGHT Length - 320mm Width - 75mm Hole Size - 30mm Thickness - 7mm

$15.93 ($19.60 inc tax)

In stock

+ −

LEFT Topper Blade - 320 length x 30mm hole

CODE: ADI3207530L

TOPPER BLADE - LEFT Length - 320mm Width - 75mm Hole Size - 30mm Thickness - 7mm

$15.93 ($19.60 inc tax)

In stock

+ −

RIGHT Topper Blade - 270 length x 30mm hole

CODE: ADI2707530R

TOPPER BLADE - RIGHT Length - 270mm Width - 75mm Hole Size - 30mm

$19.23 ($23.66 inc tax)

In stock

+ −

Knurl / Roller - 200, 300 series

CODE: 80041521

KNURL / ROLLER 80041521 NEW HOLLAND For use A roller in the trip arm which is used to determine the length of the bale. FITS - 200 and 300 series balers Linked parts: 41521, 80041521, 60614, 1111, 041521

$17.03 ($20.96 inc tax)

In stock

+ −

Knotter Brake Assembly - Fits - 200, 300, 500, 900 series

CODE: 28406

Knotter Brake 28406 New Holland For use A knotter brake used in the New Holland 200, 300, 500, 900 series square balers. Linked parts: 28406, 28407, 791788, 791787

$75.82 ($93.26 inc tax)

In stock

+ −

Bracket for trash board - right

CODE: 33.0030

BRACKET FOR TRASHBOARD - 33.0030 Country of origin: Germany NOTES Weight - 2.150kg Orig-part no. - KK063-073310 Orig-part no. are for reference purposes only

$32.42 ($39.88 inc tax)

In stock

+ −

Straw Chopper Knife - Cranked

CODE: 70-246SC

$7.47 ($9.19 inc tax)

In stock

+ −

Baler Needle

CODE: 59047

Bamford Baler Needle (Steel) 59047 For use A steel baler needle used in the Bamford square balers. Length - 663mm Distance between Mounting Holes - 96mm Mounting Holes Diameter - 13mm Linked parts: 59047, 142498, 41268, b347

$131.87 ($162.20 inc tax)

In stock

+ −

Angle Ball End for Twine Guide

CODE: 0919.64.30.00

Ball End for Twine Guide For use A ball end replacement part in the twine guide plate used in the Welger square balers. Notes Thread: M8 Linked parts: 0919.64.30.00, 0919643000

$25.82 ($31.77 inc tax)

In stock

+ −

Spring

CODE: 0940.10.71.00

Spring 0940.10.71.00 Welger Length - 41mm Linked parts: 0940.10.71.00, 0940107100

$4.40 ($5.41 inc tax)

In stock

+ −

Twine Spring - AP12, AP40, AP41, AP45, AP50, AP51

CODE: 0940.51.41.00

Twine Spring 0940.51.41.00 Welger Linked parts: 0940514100, 0940.51.41.00, 0346.09.00.00, 0346090000

$7.80 ($9.59 inc tax)

In stock

+ −

Universal Front Seat Cover

CODE: 3DF

$24.18 ($29.74 inc tax)

In stock

+ −

Mirror Adapter Kit

CODE: vm6KIT

VM6 ADAPTER KIT The VM2 and VM3 in conjunction with the VM6 Adaptor Kit, are suited to Defender owners, as well as having numerous agricultural and construction equipment applications.

$13.19 ($16.22 inc tax)

In stock

+ −

String Guide - Fits - Various Models

CODE: BP13227

String Guide BP13227 John Deere For use A string guide used in various John Deere square balers. Notes Outer Diameter - 37mm Inner Diameter - 12mm Width - 37mm Linked parts: BP13227, 8880214, 88.80.214, 8880200, 88.80.200

$14.40 ($17.70 inc tax)

In stock

+ −

RASSPE Cam Gear – 28mm Shaft

CODE: 43031

$170.33 ($209.51 inc tax)

In stock

+ −

ABBEY BOLT, NUT, BUSHING AND WASHER KIT

CODE: ABYKIT

BOLT, NUT, BUSHING AND WASHER KIT 1 x Topper Flail Bushing 1 x Washer 1 x Bolt 1 x Self Locking Nut Suitable for - ABBEY TOPPERS

$9.89 ($12.16 inc tax)

In stock

+ −

Abbey LEFT Topper Blade - 270 length x 26mm hole

CODE: ABY01L

TOPPER BLADE - LEFT Length - 270mm Width - 80mm Hole Size - 26mm Suitable for - ABBEY TOPPERS

$19.78 ($24.33 inc tax)

In stock

+ −

Bolt Set For Knotter Knife

CODE: KIT2

A set of 2 bolts used for holding the knotter knife in place. This is used in the Knotter Area of various Square Balers. THIS SET CONTAINS - 2 x Bolts THIS IS A GENUINE RASSPE PART

$2.60 ($3.21 inc tax)

In stock

+ −

Medium Rubber Handle Kit

CODE: AC60204

Rubber Handle

$13.74 ($16.90 inc tax)

In stock

+ −

Feeder Connector - Fits - 270, 271, S68, S69 square balers

CODE: 47223

Feeder Connector 47223 New Holland For use A feeder connector used in the New Holland 270, 271, S68, S69 square balers. Linked parts: 47223, 80047223

$140.51 ($172.82 inc tax)

In stock

+ −

9.267.845.00 COMER L GEARBOX

CODE: 9.267.845.00

TOPPER GEARBOX - SUPPLIED WITHOUT OIL L SHAPE GEARBOX (2 SHAFTS) Ratio - 1:1.35 OEM - 9.267.845.00 / 926784500 Suitable for - Fleming, Abbey, Conor, Belmac and Wylie Toppers Fits Fleming 6ft, 7ft, 8ft Super Float Grass Toppers 8ft and...

$313.19 ($385.22 inc tax)

In stock

+ −

9.205.829.00 COMER GEARBOX

CODE: 9.205.829.00

TOPPER GEARBOX - SUPPLIED WITHOUT OIL L SHAPE GEARBOX (2 SHAFTS) Rotation - Left - Left Ratio - 1:1.47 OEM - 9.205.829.00 / 9205829000 Suitable for - 6ft Fleming Semi-Offset Toppers and 6ft Super Float Toppers

$219.78 ($270.33 inc tax)

In stock

+ −

9.140.872.10 COMER HEAVY DUTY T GEARBOX

CODE: 9140.872.10

HEAVY DUTY TOPPER T GEARBOX - SUPPLIED WITHOUT OIL T SHAPE GEARBOX (3 SHAFTS) Ratio - 1:1.92 OEM - 9.140.872.10 / 914087210 Suitable for the following Fleming Toppers - 9ft Super Float Trailed Topper, 8ft Heavy Duty Super Float Grass Topper

$340.66 ($419.01 inc tax)

In stock

+ −

9.205.873.00 COMER T GEARBOX

CODE: 9.205.873.00

TOPPER GEARBOX - SUPPLIED WITHOUT OIL T SHAPE GEARBOX (3 SHAFTS) Ratio - 1:1.47 OEM - 9.205.873.00 / 920587300 Suitable for - Major Toppers

$274.73 ($337.91 inc tax)

In stock

+ −

9.205.805.00 COMER GEARBOX

CODE: 9.205.805.00

TOPPER GEARBOX - SUPPLIED WITHOUT OIL L SHAPE GEARBOX (2 SHAFTS) Rotation - Left - Right Ratio - 1:1.92 OEM - 9.205.805.00 / 920580500 Suitable for - Abbey, Belmac Conor, Fleming and Wylie Toppers .

$225.27 ($277.09 inc tax)

In stock

+ −

9.205.871.00 COMER GEARBOX

CODE: 9.205.871.00

TOPPER GEARBOX - SUPPLIED WITHOUT OIL L SHAPE GEARBOX (2 SHAFTS) Rotation - Left - Right Ratio - 1:1.47 OEM - 9.205.801.00 / 920580100 / 9.205.871.00 / 920587100 Suitable for - Abbey, Conor, Malone, Nugent, Fleming, Major and Wylie Toppers .

$230.77 ($283.85 inc tax)

In stock

+ −

RIGHT Topper Blade - 430 length x 30mm hole

CODE: ADI4307530R

TOPPER BLADE - RIGHT Length - 430mm Width - 75mm Hole Size - 30mm Suitable for - MAJOR / GRASSCARE

$23.63 ($29.07 inc tax)

In stock

+ −

LEFT Topper Blade - 430 length x 30mm hole

CODE: ADI4307530L

TOPPER BLADE - LEFT (Picture shown shows right hand blade) Length - 430mm Width - 75mm Hole Size - 30mm Suitable for - MAJOR / GRASSCARE

$23.63 ($29.07 inc tax)

In stock

+ −

LEFT Topper Blade - 345 length x 30mm hole

CODE: ADI3457530L

TOPPER BLADE - LEFT Length - 345mm Width - 75mm Hole Size - 30mm Suitable for - MAJOR / GRASSCARE

$21.98 ($27.03 inc tax)

In stock

+ −

RIGHT Topper Blade - 345 length x 30mm hole

CODE: ADI3457530R

TOPPER BLADE - RIGHT (Picture shown shows left hand blade) Length - 345mm Width - 75mm Hole Size - 30mm Suitable for - MAJOR / GRASSCARE

$21.98 ($27.03 inc tax)

In stock

+ −

Abbey RIGHT Topper Blade - 270 length x 26mm hole

CODE: ABY01R

TOPPER BLADE - RIGHT Length - 270mm Width - 80mm Hole Size - 26mm Suitable for - ABBEY TOPPERS

$19.78 ($24.33 inc tax)

In stock

+ −

LEFT Topper Blade - 270 length x 30mm hole

CODE: ADI2707530L

TOPPER BLADE - LEFT Length - 270mm Width - 75mm Hole Size - 30mm

$19.23 ($23.66 inc tax)

In stock

+ −

RIGHT Topper Blade - 320 length x 26mm hole

CODE: ADI3207526R

TOPPER BLADE - RIGHT Length - 320mm Width - 75mm Hole Size - 26mm Thickness - 7mm

$17.03 ($20.96 inc tax)

In stock

+ −

LEFT Topper Blade - 320 length x 26mm hole

CODE: ADI3207526L

TOPPER BLADE - LEFT Length - 320mm Width - 75mm Hole Size - 26mm Thickness - 7mm

$17.03 ($20.96 inc tax)

In stock

+ −

M20 X 80 BOLT AND NUT SET

CODE: M2080

M20 X 80 BOLT, NUT AND FLAT WASHERS SET CONSISTS OF - 1 X M20x80 Bolt - Strength 8.8 1 x M20 Locknut 2 x M20 Flat Washers FITS MODELS – BRIDGEWAY, BELMAC, CONOR, FLEMING, HI-SPEC, NUGENT For use WITH Shredder / Slasher Blade

$6.04 ($7.44 inc tax)

In stock

+ −

Plunger Knife - Fits - AP61, AP63

CODE: 1116160221

Plunger Knife 1116160221 Welger For use A moving plunger knife used in the Welger AP61 and AP63 square balers. Notes Length - 335mm Width - 70mm Distance between Holes - 95mm Linked parts: 0982.25.05.00, 0982250500, 1116.16.02.21,...

$86.26 ($106.11 inc tax)

In stock

+ −

Bush Ï25 - 24

CODE: 63-ZZZ-24

BUSH - 63-ZZZ-24 Country of origin: Germany For use Dimensions - Displayed in image. Weight - 0.083 kg Orig-part no. - 71.142.23, 184.106 Orig-part no. are for reference purposes only

$3.96 ($4.87 inc tax)

In stock

+ −

Boot Flail - 92

CODE: 63-SPH-92

BOOT FLAIL - 63-SPH-92 Country of origin: Germany For use Weight - 0.530 kg Width - 57mm Length - 85mm Orig-part no. - 7190462, 7770723A Orig-part no. are for reference purposes only

$13.03 ($16.03 inc tax)

In stock

+ −

Y-blade

CODE: 63-SIC-12

$6.68 ($8.22 inc tax)

In stock

+ −

Pruning hammer

CODE: 63-SEP-55

$33.84 ($41.62 inc tax)

In stock

+ −

Pruning hammer

CODE: 63-SEP-51

Linked parts: 194.02.025, 19402025

$20.33 ($25.01 inc tax)

In stock

+ −

Shackle - ROU-75

CODE: 63-ROU-75

Linked parts: 5.556.05, 555605

$5.01 ($6.16 inc tax)

In stock

+ −

Flail

CODE: 63-ROU-57

$3.41 ($4.19 inc tax)

In stock

+ −